Multi-physical field guided wave simulation for circular concrete-filled steel tubes coupled with piezoelectric patches considering debonding defects

Numerical Analysis of Concrete-Filled Circular Steel Tubes

Effect of the Concrete Strength on the Concrete-Steel Bond in Concrete Filled Steel Tubes

In this study, the concrete-steel bond strength of concrete filled cylindrical steel tubes has been experimentally investigated. 22 short, high strength and normal concrete filled circular steel tubes were tested. Push-out test was carried out as the common method to evaluate the bond carrying capacity. Four different concrete mixes were used in preparing the specimens. The steel tubes were w...

Seismic Design of Concrete-Filled Circular Steel Bridge Piers

The adequacy of the existing design provisions for concrete-filled steel pipes subjected to axial forces and flexure is reviewed by comparing the strengths predicted by the CAN/CSA-S16.1-M94, AISC LRFD 1994, and the Eurocode 4 1994 codes and standards against experimental data from a number of investigators. New proposed design equations are then developed, in a format compatible with North Ame...

Non-linear Analysis of Multi-hazard Performance of Cylindrical Concrete Filled Steel Tubes Bridge Piers

Advanced finite element techniques are used to investigate the multi-hazard (earthquake and blast) performance of Concrete-Filled Steel Tubes (CFSTs) and Concrete Filled Double Skinned Tubes (CFDSTs) for bridge engineering applications. Specimens of both sections are analyzed using the finite element package LS-DYNA under similar seismic and blast loading. First, behavior of CFSTs recorded in s...

Multi-response Optimization of Grooved Circular Tubes Filled with Polyurethane Foam as Energy Absorber

The main objective of this research is to improvethe design and performance of the polyurethane foam-filled thin-walled aluminum grooved circular tubes using multi-response optimization (MRO) technique. The tubes are shaped with the inner and the outer circular grooves at different positions along the axis. For this aim, several numerical simulations using ABAQUS finite element explicit code ar...