Multi-Objective Optimization of Rolling Schedule for Five-Stand Tandem Cold Mill

Optimization of Reduction Settings and Inter-stand Tensions for Tandem Cold Mills using Genetic Algorithm

Cold rolling process is a complicated process which can be optimized by changing in variables and settings. This paper presents a set-up optimization system developed to calculate reductions and inter-stand tensions for each stand of a five stand tandem cold mill. The main objective in this optimization is minimization of power consumption. First, by using the analytical method, the equations ...

Improved Drive Control for Multi-Stand Cold Rolling Mills

In multi-stand cold rolling mills an accurate synchronization of the mill drives is necessary for a good product quality and for a safe process operation. During the standard commissioning procedure the control performance of each drive is optimized individually. However, in normal operation mode the performance is then not always optimal due to the coupling of the drives by the strip being rol...

Rolling mill simulator A new platform for testing, analysis and optimization of cold rolling mills

The cold rolling of flat metal products especially in tandem or multi-stand mills is a highly complex process where the product quality is influenced by various aspects. With the help of a hardware-in-the-loop simulator, the complete rolling process can be simulated and tested in real-time. This allows pre-commissioning and pre-optimizations before the actual commissioning work is done on the p...

Improvement of thickness tolerances For a two-stand aluminium cold rolling mill

trol loops to compensate backup roll eccentricity and harmonic hardness variation allows a significant improvement in strip thickness performance. These measures were successfully implemented as an extension to an exist ing two-stand aluminium cold rolling mill. An essential quality characteristic in the cold rolling sector is the minimum thickness deviation that can be achieved at final gauge,...

High-tech for Thin Sheet Modernization of a Tandem Cold Rolling Mill at Arcelor Eisenhüttenstadt