Multi-objective optimization of machining parameter in laser drilling of glass microballoon/epoxy syntactic foams

Multi-objective Optimization of Laser Beam Machining Process Parameters

Laser beam machining (LBM) is one of the most widely used thermal energy based non-contact type advance machining process. In recent years, researchers have explored a number of ways to improve the LBM process performance by analyzing different factors that affect the quality characteristics of LBM process such as kerf width, kerf taper, surface finish etc. It is revealed from the literature th...

solution of security constrained unit commitment problem by a new multi-objective optimization method

چکیده-پخش بار بهینه به عنوان یکی از ابزار زیر بنایی برای تحلیل سیستم های قدرت پیچیده ،برای مدت طولانی مورد بررسی قرار گرفته است.پخش بار بهینه توابع هدف یک سیستم قدرت از جمله تابع هزینه سوخت ،آلودگی ،تلفات را بهینه می کند،و هم زمان قیود سیستم قدرت را نیز برآورده می کند.در کلی ترین حالتopf یک مساله بهینه سازی غیر خطی ،غیر محدب،مقیاس بزرگ،و ایستا می باشد که می تواند شامل متغیرهای کنترلی پیوسته و گ...

Hybrid Evolutionary Multi-Objective Optimization of Machining Parameters

Evolutionary multi-objective optimization (EMO) has received significant attention in recent studies in engineering design and analysis due to their flexibility, wide-spread applicability and ability to find multiple trade-off solutions. Optimal machining parameter determination is an important matter for ensuring an efficient working of a machining process. In this paper, we describe the use o...

Laser Drilling Assisted with Jet Electrochemical Machining

Controlled Shrinkage of Expanded Glass Particles in Metal Syntactic Foams

Metal matrix syntactic foams have been fabricated via counter-gravity infiltration of a packed bed of recycled expanded glass particles (EG) with A356 aluminum alloy. Particle shrinkage was studied and has been utilized to increase the particles' strength and tailor the mechanical properties of the expanded glass/metal syntactic foam (EG-MSF). The crushing strength of particles could be doubled...