Multi-lab study on the pure-gas permeation of commercial polysulfone (PSf) membranes: Measurement standards and best practices
نویسندگان
چکیده
Gas-separation membranes are a critical industrial component for low-carbon and energy-efficient future. As result, many researchers have been testing membrane materials over the past several decades. Unfortunately, almost all membrane-based systems home-built, there no widely accepted material standards or protocols in literature, making it challenging to accurately compare experimental results. In this multi-lab study, ten independent laboratories collected high-pressure pure-gas permeation data H 2 , O CH 4 N commercial polysulfone (PSf) films. Equipment information, procedures, from labs were provide (1) permeability values at 35 °C PSf as reference standard, (2) statistical analysis of lab-to-lab uncertainties evaluating permeability, (3) list best practices sample preparation, equipment set-up, using constant-volume variable-pressure apparatuses. Results summarized work standard recommended materials. • Collected films 10 labs. Provided permeabilities standard. Evaluated calculating permeability. Listed setup, procedure.
منابع مشابه
Characterization of Commercial Ceramic and Hybrid Membranes Using Gas Permeation and Permporometry Tests
The gas separation performance of commercial ceramic Titania and hybrid silica (HybSi®) membranes was assessed using the gas permeation and permporometry methods. Results indicated that the HybSi® membranes have a hybrid surface containing regions covered by a polymeric matrix and others with inorganic pores. These membranes have high H2 selectivity, which incre...
متن کاملFabrication and Evaluation of Functionalized Nano-titanium Dioxide (F-NanoTiO2)/ polysulfone (PSf) Nanocomposite Membranes for Gas Separation
متن کامل
Effects of Polysulfone (PSf) Support Layer on the Performance of Thin-Film Composite (TFC) Membranes
The performance of thin-film composite (TFC) membranes was related to the properties of support layers. In this study, polysulfone (PSf) membranes formed by the phase inversion process under various concentrations of PSf and polyvinylpyrrolidone (PVP) additive were used as support layers to prepare polyamide (PA) TFC membranes by the interfacial polymerization (IP). The effects of PSf and PVP c...
متن کاملStudy on Commercial Membranes and Sweeping Gas Membrane Distillation for Concentrating of Glucose Syrup
In this work, sweeping gas membrane distillation (SGMD) process was used for concentrating of glucose syrup. The main questions in this work include: is SGMD process practical for concentrating of glucose solution prior the fermentation step in bioethanol process?. and are the commercially available hydrophobic membranes sufficient enough to develop the SGMD process in pilot scale for this issu...
متن کاملPolyester/SiO2 Nanocomposites: Gas Permeation, Mechanical, Thermal and Morphological Study of Membranes
Using of nanocomposite membranes composed of polymer and inorganic nanoparticles is a novel method to enhance gas separation performance. In this study, membranes were fabricated from polyester (PE) containing silica (SiO2) nanoparticles and gas permeation properties of the resulting membranes were investigated. Morphology of the membranes, SiO2 distribution a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Membrane Science
سال: 2022
ISSN: ['1873-3123', '0376-7388']
DOI: https://doi.org/10.1016/j.memsci.2022.120746