Multi Frequency on RGB Lighting LED Driver Technique

Study on full color RGB LED source lighting for general lighting and Improvement of CRI (Color Rendering Index)

The purpose of this study is to check if LED lighting can be used as general lighting and examine the color rendering property of full color RGB LED lighting. CRI is one of the important properties of evaluating lighting. However the present CRI does not fully evaluate LED lightings. Firstly, the performance of a simple task was compared other than comparing CRI values for different lighting. F...

Dimming LED Lighting

LED lighting has the potential to offer many benefits to the user and to society as a whole. Very high efficiency together with extremely long life expectancy of the LEDs reduces the energy consumption and the use of resources, and can offer low lifecycle cost. In order to become widely accepted, LED lighting must provide dimming capability at least equivalent to that offered by traditional inc...

Development of Driver and Color Control System for High-Power RGB LED

A bilevel driving approach was proposed in the literature for mitigating the energy wastage associated with driving LEDs at high peak current. The main idea is to introduce two drive parameters, i.e., high/low PWM current levels and duty cycles, that give rise to a 2-D luminosity control capability. The same idea was later generalized to an n-level driving approach for maximizing the electrical...

A Single-Stage LED Driver Based on BCM Boost Circuit and LLC Converter for Street Lighting System

LED Driver Lifetime and Reliability

While LEDs themselves are extremely reliable and have a long lifetime, are electronic LED drivers capable of providing the required current/voltage input to the LEDs over their whole lifetime? This paper aims to address the above question in general and for the Xitanium family of LED drivers developed by Philips Lighting specifically. It will describe some of the strategies which Philips applie...