Movement kinematics and cyclic fatigue of NiTi rotary instruments: a systematic review
نویسندگان
چکیده
منابع مشابه
cyclic fatigue resistance and fractographic analysis of race and protaper rotary niti instruments
introduction: this study investigated the fatigue and fracture modes of race and protaper rotary instruments. materials & methods: fatigue resistance was evaluated by rotating the files 30 ° or 60 ° and with 2 or 5mm radius of curvature. race taper 06 size 25 and protaper f1 files (n=40) were used. the number of rotations to failure was analyzed by two-way anova and independent sample t-tes...
متن کاملCyclic fatigue of NiTi rotary instruments in a simulated apical abrupt curvature.
AIM To evaluate the cyclic fatigue resistance of five NiTi rotary systems in an abrupt apical curvature. METHODOLOGY Cyclic fatigue testing was performed in stainless-steel artificial canals with a 2-mm radius of curvature and an angle of curvature of 90 degrees constructed to the dimensions of the instruments tested. The middle of the simulated curvature was 2.5 mm from the tip of the instru...
متن کاملCyclic Fatigue Resistance and Fractographic Analysis of Race and Protaper Rotary NiTi Instruments
INTRODUCTION This study investigated the fatigue and fracture modes of RaCe and ProTaper rotary instruments. MATERIALS AND METHODS Fatigue resistance was evaluated by rotating the files 30° or 60° and with 2 or 5mm radius of curvature. RaCe taper 06 size 25 and ProTaper F1 files (n=40) were used. The number of rotations to failure was analyzed by two-way ANOVA and independent sample t-test. F...
متن کاملCyclic fatigue resistance of rotary NiTi instruments after simulated clinical use in curved root canals.
The aim of this study was to assess cyclic fatigue resistance in rotary nickel-titanium instruments after simulated clinical use in curved root canals (40-degree, 5-mm radius curve). Thirty-six RaCe rotary NiTi files, size #5, taper 0.04, were divided into 3 groups: Groups A, B and C with one, three and five cycles of use, respectively. Time to failure was recorded with a stopwatch in seconds a...
متن کاملCyclic fatigue of Profile rotary instruments after simulated clinical use.
AIM The purpose of this study was to evaluate cyclic fatigue of Profile Ni-Ti rotary instruments (PRIs) after dry heat sterilization and up to 10 times simulated clinical use. METHODOLOGY Instruments of size 40-15 were used in a crown-down technique. Three groups were included in this study. In groups 1 and 2, each set of instruments was used in five and 10 canals, respectively. Group 3 was t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Endodontic Journal
سال: 2016
ISSN: 0143-2885
DOI: 10.1111/iej.12613