MOVABLE BED SCOUR AROUND SUBMERGED SPUR-DIKES
نویسندگان
چکیده
منابع مشابه
Exploring Appropriate CFD Model and Impact Scale for Non-submerged Spur Dikes
Spur dike is a common hydraulic structure, which is widely used in hydraulic engineering such as channel regulation, flood prevention and river diversion for preserving the desired water depth, deflecting the main current and protecting river banks. In actual operations, spur dikes exert influence on river system usually in the form of groups, and the flow field around spur dike group is compli...
متن کاملExperimental comparison of sacrificial piles and submerged vanes as scour countermeasures around bridge pier
An experimental study has been conducted on the effectiveness of two types of flow-altering countermeasures placed around a cylindrical pier under clear water condition, which include sacrificial piles and submerged vanes. Their arrangements follow the optimal configurations recommended in the published articles with some modification. The temporal evolution of maximum scour depth and its equil...
متن کاملControl of Scour around the Submarine Pipelines in the River Bed
This paper presents, a set of experiments was conducted in a Plexiglas flume setup to investigate the simultaneous use of pipe and blade in the scour control around a submerged pipe. A vertical cylindrical pipe with and without a blade placed below it was selected for the experiments. The experiments were carried out in two different sates: with blade and without blade the pipe. Moreover, they ...
متن کاملCountermeasures against Scour at Bridge Abutments
HUA LI. Countermeasures against Scour at Bridge Abutments (Under the direction of Dr. BRIAN D. BARKDOLL) Scour at bridge abutments can cause damage or failure of bridges and result in excessive repairs, loss of accessibility, or even death. To mitigate abutment scour, both clear-water and live-bed laboratory experiments in a compound channel were performed using parallel walls and spur dikes as...
متن کاملScour Caused by Three-Dimensional Submerged Square Wall Jet: Sand Deposition in Scour Hole and Ridge
Laboratory tests were carried out to assess the local scour by three-dimensional wall jets from a square crosssection nozzle. To this end, three different tailwater depths were used and the jet expansion ratio was held greater than ten. Velocity measurements were conducted using a one component laser Doppler anemometer. The jet exit Reynolds number was maintained to 1x10 and this value can be c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: PROCEEDINGS OF HYDRAULIC ENGINEERING
سال: 2001
ISSN: 0916-7374,1884-9172
DOI: 10.2208/prohe.45.373