منابع مشابه
Utilization of waste glass as sand replacement in cement mortar
In this study, alkali silica reaction (ASR) expansion and strength characteristics of mortar containing waste glasses are analyzed in terms of waste glass content and glass color. Three different colors of waste glasses (white, green and brown) are replaced with sand at ratios of 10%, 30% and 100% by weight. The mixtures used in this study did not show a considerable ASR expansion. All batches ...
متن کاملPreparation of Sulfur Mortar from Modified Sulfur
Mixtures of mineral aggregate and modified sulfur, wherein the modified sulfur functions as a binder, are termed sulfur concretes or sulfur mortars depending on the form of the mineral aggregate. Molten sulfur reacted with olefinic additive, at 130-140 ºC, and then mixed with preheated filler and aggregates. Sulfur mortar samples were prepared by mixing 32 % molten sulfur, 10 % filler and 5...
متن کاملMeasurement and Modeling of the Ability of Crack Fillers to Prevent Chloride Ingress into Mortar.
A common repair procedures applied to damaged concrete is to fill cracks with an organic polymer. This operation is performed to increase the service life of the concrete by removing a preferential pathway for the ingress of water, chlorides, and other deleterious species. To effectively fulfill its mission of preventing chloride ingress, the polymer must not only fully fill the macro-crack, bu...
متن کاملEnergy-saving method for technogenic waste processing
Dumps of a mining-metallurgical complex of post-Soviet Republics have accumulated a huge amount of technogenic waste products. Out of them, Kazakhstan alone has preserved about 20 billion tons. In the field of technogenic waste treatment, there is still no technical solution that leads it to be a profitable process. Recent global trends prompted scientists to focus on developing energy-saving a...
متن کاملSand/cement ratio evaluation on mortar using neural networks and ultrasonic transmission inspection.
The quality and degradation state of building materials can be determined by nondestructive testing (NDT). These materials are composed of a cementitious matrix and particles or fragments of aggregates. Sand/cement ratio (s/c) provides the final material quality; however, the sand content can mask the matrix properties in a nondestructive measurement. Therefore, s/c ratio estimation is needed i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Вестник ГГНТУ. Технические науки
سال: 2020
ISSN: 2686-7567
DOI: 10.34708/gstou.2020.70.83.010