Morphology of polyamide 6 confined into carbon nanotubes
نویسندگان
چکیده
منابع مشابه
Polyamide 6/Multiwalled Carbon Nanotubes Nanocomposites with Modified Morphology and Thermal Properties
Pure polyamide 6 (PA6) and polyamide 6/carbon nanotube (PA6/CNT) composite samples with 0.5 weight percent loading of pristine or functionalized CNTs were made using a solution mixing technique. Modification of nanotube surface as a result of chemical functionalization was confirmed through the presence of lattice defects as examined under high-resolution transmission electron microscope and ab...
متن کاملTransformation of ionic liquid into carbon nanotubes in confined nanospace.
We have developed a two-step filling process for the nano-reaction of ionic liquid in a tip-closed SWNT, where fullerenes are inserted at the end of the host SWNT as a plug to prevent the leakage of the confined ionic liquid during heat treatment.
متن کاملEffect of the Type of Carbon Nanotubes on Tribological Properties of Polyamide 6
Multiwalled carbon nanotubes have been synthesized by catalytic chemical vapor deposition of ethylene, using two different catalysts in order to obtain nanotubes with average diameters of 24 and 58 nm, and different lengths. Polyamide 6 (PA6) was reinforced by melt-mixing in an extruder with 2 wt% functionalized and unfunctionalized carbon nanotubes (CNTs). The nanocomposites were characterized...
متن کاملEffect of polyamide 6 on the morphology and electrical conductivity of carbon black-filled polypropylene composites
Carbon black (CB)-filled polypropylene (PP) with surface resistivity between 106 and 109 Ω sq-1 is the ideal antistatic plastic material in the electronics and electric industry. However, a large amount of CB may have an adverse effect on the mechanical properties and processing performance of the material, thus an improved ternary system is developed. Blends of CB-filled PP and polyamide 6 (PA...
متن کاملPolysulfone/ Carbon Nanotubes Asymmetric Nanocomposite Membranes: Effect of Nanotubes Surface Modification on Morphology and Water Permeability
Polysulfone/carbon nanotubes (PSF/CNTs) nanocomposite membrane was prepared via phase inversion induced by immersion precipitation technique. In addition, the surface of the CNTs were functionalized by polar carboxylic and amine groups to improve the interaction between the CNTs and the polymer matrix. For this purpose, the neat CNTs were chemically treated using sulfuric acid/ nitric acid (H2S...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science-Poland
سال: 2015
ISSN: 2083-134X
DOI: 10.1515/msp-2015-0043