Morphology Development During Micro Injection Moulding of Thermoplastics

Micro-Injection Moulding of Polymer Microfluidic Devices

* Building 56, Cranfield University, Wharley End, Cranfield, Bedfordshire, MK43 0AL, UK. Tel: +44 (0)1234 750111 ext: 2513; E-mail: [email protected] a Building 56, Cranfield University, Wharley End, Cranfield, Bedfordshire, MK43 0AL, UK. Fax: +44 (0)1234 751346; Tel: +44 (0)1234 750111 ext: 2379; E-mail: [email protected] b Building 61, Cranfield University, Wharley End, Cranfield...

Injection moulding antireflective nanostructures

Simulation Tools for Injection Moulding

In this paper the concern is certain simulation tools for the lling phase of injection moulding of plastics. A mathematical model, called the distance model, of the injection moulding process has been developed by Professor Gunnar Aronsson at the University of Linkk oping. From this model one can nd the lling pattern (i.e. ow fronts) of the molten polymer as it enters the mould, by solving a sh...

Injection moulding temperature and powder loading influence to the metal injection moulding (MIM) green compact

1 UTM Razak School of Engineering and Advanced Technology, Universiti Teknologi Malaysia, International Campus, 54100 Kuala Lumpur, Malaysia. 2 Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia. 3 Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia. 4 Faculty of Me...

Effect of Runner Dimensions on Cavity Filling in Micro- Injection Moulding for Defect-free Parts

Modelling and simulation of injection moulding process is an important technique that could shorten production cycle time with improved productivity for defect-free parts. This technique is more suitable for micro-injection moulding (μIM) process as likely defects during production can be predicted. Therefore, this study aims to investigate the effect of runner dimensions on quality of moulded ...