Morphologies, Mechanical Properties and Thermal Stability of Poly(lactic acid)/Waste Rubber Powder Blends
نویسندگان
چکیده
منابع مشابه
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولMechanical Properties and Morphologies of Carboxyl-Terminated Butadiene Acrylonitrile Liquid Rubber/Epoxy Blends Compatibilized by Pre-Crosslinking
In order to enhance the compatibilization and interfacial adhesion between epoxy and liquid carboxyl-terminated butadiene acrylonitrile (CTBN) rubber, an initiator was introduced into the mixture and heated to initiate the cross-linking reaction of CTBN. After the addition of curing agents, the CTBN/epoxy blends with a localized interpenetrating network structure were prepared. The mechanical p...
متن کاملpolycaprolactone/polytetrahydrofuran supramolecular polymer blends: mechanical and thermal properties
application of supramolecular polymer blending in preparation of materialswith adjustable mechanical properties is addressed. it is anticipated that the microstructure and properties of polymer blends are drastically controlled by the inter-molecular interactions. on this basis, the effect of strongly dimerising ureidopyrimidinone end groups (upy) with the capability of quadruple hydrogen bondi...
متن کاملImplications of LDPE Branching and Mw on Thermal and Mechanical Properties of PP/LDPE Blends
The influences of short chain branching (SCB) and molecular (Mw) weight of low density polyethylene (LDPE) on the solid state properties of polypropylene (PP)-LDPE blends were investigated by mechanical and thermal techniques. DSC analysis of all blends exhibit a double melting peak at all compositions studied thus suggesting that both PP and LDPE crystals exist separately in the solid state. I...
متن کاملMechanical and Thermal Properties of Toughened Poly(L-lactic) Acid and Lignin Blends
Fully degradable poly(L-lactic) acid (PLLA) and lignin blends were prepared using the melt blending method. The impact strength of PLLA was dramatically improved by 52.4% and 36.6% with the addition of 5 wt% and 10 wt% of lignin, respectively. Meanwhile, the Young’s modulus was maintained. Polarized optical microscopy (POM) results indicated that lignin served as a nucleating agent for the hete...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Asian Journal of Chemistry
سال: 2014
ISSN: 0970-7077,0975-427X
DOI: 10.14233/ajchem.2014.17353