Morphological Characterization of Spray-Coated PCBM Thin Films
نویسندگان
چکیده
منابع مشابه
Characterization of Spray Pyrolysed CuInS2 Thin Films
An indigenously developed chemical spray pyrolysis system was used to deposit polycrystalline CuInS2 thin films. It was found that smaller spray rate results in films with better crystallinity and lower resistivity. Increase in surface roughness of the films was observed for higher spray rates. Variations in film stoichiometry with composition of spray solution were analyzed along with its opto...
متن کاملDeposition and characterization of SnO2:Sb thin films fabricated by the spray pyrolysis method
In this study, thin films of transparent semiconductor tin oxide doped with antimony impurities on the glass substrates with different concentrations of antimony that have been prepared using spray pyrolysis method. The effects of different concentration of antimony on the structural, optical, and electrical properties of the thin films were investigated. Prepared layers were characterized by X...
متن کاملCharacterization of thermally aged AlPO4-coated LiCoO2 thin films
The electrochemical properties and stability during storage of pristine and AlPO4-coated LiCoO2 thin films were characterized. The wide and smooth surface of the thin film electrode might provide an opportunity for one to observe surface reactions with an electrolyte. The rate capability and cyclic performance of the LiCoO2 thin film were enhanced by AlPO4 surface coating. Based on secondary io...
متن کاملFabrication and characterization of fluorine-doped thin oxide thin films and nanorod arrays via spray pyrolysis
This paper reports the synthesis and characterization of fluorine-doped tin oxide (FTO) thin films via intermittent spray pyrolysis utilizing a solution mixture of tin chloride pentahydrate and ammonia fluoride. Utilizing the same solution, nanorod arrays were fabricated via template-based growth. Uniform and crack-free FTO films over 20×20 mm with a thickness up to 900 nm have been routinely a...
متن کاملStudies on Structural and Optical Characterization of In-Zn-S Ternary Thin Films Prepared by Spray Pyrolysis
Thin films of indium doped zinc sulfide (ZnS) for different indium (In) concentrations (x=0.0 - 0.8) were deposited onto glass substrate by spray pyrolysis method at 523K temperature. Aqueous solution of zinc acetate, indium chloride and thiorea were used to deposit the In-Zn-S film. The deposited thin films were characterized by Energy dispersive X-ray (EDX), Scanning electron microscopy (SEM)...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: e-Journal of Surface Science and Nanotechnology
سال: 2012
ISSN: 1348-0391
DOI: 10.1380/ejssnt.2012.538