Moroccan oil shale and coal waste as alternative raw materials in Portland cement clinker manufacture. Clinkerisation reactions and clinker characterisation
نویسندگان
چکیده
منابع مشابه
Energy Requirements of Using Oil Shale in the Production of Ordinary Portland Clinker
Energy balance was performed on the clinkering process when utilizing oil shale as a source of both raw materials and energy. The balance was also compared with the typical energy requirements for production of Ordinary Portland (OP) Clinker. The use of Jordanian oil shale can reduce energy requirements in production of OP clinker by 15–20%. This reduction is due to two factors: lower clinkerin...
متن کاملUtilization of Palm Oil Clinker as Cement Replacement Material
The utilization of waste materials from the palm oil industry provides immense benefit to various sectors of the construction industry. Palm oil clinker is a by-product from the processing stages of palm oil goods. Channelling this waste material into the building industry helps to promote sustainability besides overcoming waste disposal problems. Environmental pollution due to inappropriate wa...
متن کاملReusing Desulfurization Slag in Cement Clinker Production and the Influence on the Formation of Clinker Phases
The purpose of this study was to investigate the reuse of desulfurization slag in cement clinker production and its influence on the formation of clinker phases. The desulfurization slag that mainly contained Ca and Si was identified as non-toxic, and thus it should be suitable to be reused in clinker production. The addition of desulfurization slag increased the melt phase during clinkerizatio...
متن کاملINVESTIGATING THE LINEAR EXPANSION, SET, AND STRENGTH BEHAVIORS OF THE BINARY MIXTURE PORTLAND CEMENT CLINKER-GYPSUM
Abstract: The linear expansion, early-age compressive strength and setting times of the binary mixtures of gypsum and Portland cement clinkers of relatively low C3A-contents were investigated. For this reason, type 1, 2, and 5 of Portland cement-clinkers were selected and a number of binary mixtures were designed. At relatively lower percentages of gypsum (about 5%), the early strength behavior...
متن کاملTrace Elements in Clinker –
The trace element content of clinkers (and possibly of cements) can be used for the qualitative identification (i.e. manufacturing factory). Several hundred clinker sorts have been analysed (by replicated quarterly samples, collected from all Hungarian cement factories as well as from factories of 8 foreign countries) to determine their Mg, Sr, Ba, Mn, Ti, Zr, Zn and V content. The first 6 elem...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materiales de Construcción
سال: 2018
ISSN: 1988-3226,0465-2746
DOI: 10.3989/mc.2018.07017