Monopole Antenna With Inkjet-Printed EBG Array on Paper Substrate for Wearable Applications
نویسندگان
چکیده
منابع مشابه
Inkjet printed flexible antenna on textile for wearable applications
We report a direct write inkjet printing technique for fabricating a flexible antenna on textile for use in smart textile applications such as wearable systems (Rienzo et al. 2006). The complete antenna was deposited entirely using inkjet printing. The inkjet printed antenna is based on a half wavelength dipole antenna offering a planar structure and acceptable size. The printable silver nanopa...
متن کاملHexagonal Shaped Body Wearable Textile Antenna on EBG Substrate Material
In this paper, a hexagonal shape wearable antenna is presented .the proposed antenna is having EBG structure embed in the inner substrate layer. The antenna resonates at 2.45 GHz. When antenna is incorporated with EBG cell structure, it shows improvement in gain by 1.9 dB and 33% bandwidth improvement. The EBG structure consists of just a 3x3 elements but reduces backward radiations considerabl...
متن کاملSquare Printed Monopole Antenna for Wireless Applications
In this article design and optimization of square printed monopole antenna for wireless application is proposed. Theory of characteristics mode (TCM) is used for analysis of current modes on the antenna. TCM analysis shows that beveled ground plane improves the impedance bandwidth. The antenna operates over the frequency range from 1.860 GHz to 5 GHz for a VSWR ≤ 2, covering the GSM (1900-1990M...
متن کاملPrinted Monopole Antenna Technology for Wideband Applications
Broadband planar monopole antennas have attracted their candidature for wideband applications like WLAN, WiMAX, RADAR, Satellite etc. Eventhough planar monopole antennas have several advantages in terms of cost, compactness, conformality, simplicity they suffer from a major disadvantage of having very narrow bandwidth. Various planar configurations such as circular, triangular, rectangular, hex...
متن کاملA Novel “Green” Inkjet-Printed Z-Shaped Monopole Antenna for RFID Applications
In this paper, a novel “green” inkjet-printed antenna for UHF Radio Frequency Identification (RFID) tags is presented. A slotted Z-shaped monopole configuration is selected and fabricated using inkjet-printing technology on a flexible, low-cost paper substrate utilizing a simple, fast, and environmentally friendly process. The design characteristics of the antenna are verified and the simulated...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Antennas and Wireless Propagation Letters
سال: 2012
ISSN: 1536-1225,1548-5757
DOI: 10.1109/lawp.2012.2203291