Monitoring of Thermal and Flow Processes in the Two-Phase Spray-Ejector Condenser for Thermal Power Plant Applications
نویسندگان
چکیده
The paper deals with the problem of accurate measuring techniques and experimental research methods for performance evaluation direct contact jet-type flow condensers. nominal conditions range temperature, pressure rate in all characteristic points novel test rig installation were calculated using developed model. Next, devices measurement a designed testing two-phase spray ejector condensers system (SEC) studied. SEC can find application gas power cycles as device dedicated to condensing steam exhaust gases without decreasing or even increasing pressure. presents design assumptions rig, its layout results simulations models. Based on initial thermal conditions, main process monitoring formulated. Then, discussion commercially available solutions was presented. basic technical parameters sensors given, discussed details.
منابع مشابه
Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production
The accurate prediction of wellbore temperature distribution helps to accurately estimate well pressure profile and bottom-hole pressure (BHP) which is important in the under-balanced drilling (UBD) operation. In this paper effect of temperature variation due to heat transfer of drilling fluid with the formation and also oil and gas production from the reservoir into the annulus in under-balanc...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولModeling and Control of Water Level in Boiler Drum for Nassiriyah Thermal Power Plant
The boiler drum process is a nonlinear, complex and multivariable process which includes significant time delay. Therefore, the control on the water level in the drum is not easy and ideal. The first objective of this paper is to model the drum water level referring to 210 MW power unit for Nassiriyah thermal power plant. The second objective is to study the water level controller operation wit...
متن کاملOnline Intelligent Condition Monitoring Maintenance Management for Thermal Power Plant
The study seeks to show how online remote condition monitoring helps to improve the maintenance system in a power plant from mainly predetermined and corrective approach to predictive maintenance and, the resultant benefits of its adoption. The findings clearly indicate the various aspects of online remote condition monitoring system which thermal power plants can consider to improve on plant s...
متن کاملVision-aided Monitoring & Control of Thermal Spray, Spray
Vision is one of the most powerful forms of non-contact sensing for monitoring and control of manufactusang processes. However, processes involving an arc plasma or flame such as welding or thermal spraying pose particularly challenging problems to conventional vision sensing and processing techniques. The arc or plasma is not typically limited to a single spectral region and thus cannot be eas...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2022
ISSN: ['1996-1073']
DOI: https://doi.org/10.3390/en15197151