Monitoring of the framings stress-strain with strain gauges

Embedded Strain Gauges for Condition Monitoring of Silicone Gaskets

A miniaturized strain gauge with a thickness of 5 µm is molded into a silicone O-ring. This is a first step toward embedding sensors in gaskets for structural health monitoring. The signal of the integrated sensor exhibits a linear correlation with the contact pressure of the O-ring. This affords the opportunity to monitor the gasket condition during installation. Thus, damages caused by faulty...

Nonlinearity and Hysteresis of Resonant Strain Gauges

Nonlinearity and hysteresis effects of electrostatically activated, voltage driven resonant microbridges have been studied theoretically and experimentally. It is shown, that, in order to avoid vibration instability and hysteresis to occur, the choices of the ax . and d.c. driving voltages and of the quality factor of a resonator, with a given geometry and choice of materials, are limited by a ...

Measurement of strains in fixed bridges with electronic strain gauges.

A Hybrid Stress Plane Element with Strain Field

In this paper, a plane quadrilateral element with rotational degrees of freedom is developed. Present formulation is based on a hybrid functional with independent boundary displacement and internal optimum strain field. All the optimality constraints, including being rotational invariant, omitting the parasitic shear error and satisfying Fliepa’s pure bending test, are considered. Moreover, the...

A New Technique based on Strain Energy for Correction of Stress-strain Curve

Tensile stress-strain curve is of high importance in mechanics of materials particularly in numerical simulations of material deformations. The curve is usually obtained by experiment but is limited by necking phenomenon. Engineering stress-strain curve is converted to true stress-strain curve through simple formulas. The conversion, however, is correct up the point of necking. From this point ...