Monitoring of Burr and Prefailure Phase Caused by Tool Wear in Micro-Drilling Operations Using Thrust Force Signals
نویسندگان
چکیده
منابع مشابه
Tool Design for Burr Removal in Drilling Operations
One of the most significant problems encountered in machining, particularly in drilling, is that of burr formation. Burrs usually comprise of work piece material which has been plastically deformed during the machining process and projects beyond the desired edge of the work piece. The adverse effects of burrs depend on the component application but may include; stress concentration and related...
متن کاملvibration drilling tool and thrust force investigation in vibratory drilling process of al 2024-t6
vibratory drilling (vd)process is a new modern technology where longitudinal wave with high frequency (more than 16 khz) and low amplitude (usually between 2 up to 30 µm) is superimposed on the movement of cutting tool, resulting in connection and disconnection of cutting tool engagement with workpiece. in this study, in order to perform vibratory drilling process, two vibration tools are desig...
متن کاملOnline Tool Wear Monitoring Tool Wear Monitoring Using Acoustic Emission
This research work highlights the effects of acoustic emission (AE) signals emitted during the milling of H13 tool steel as an important parameter in the identification of tool wear. These generated AE signals provide information on the chip formation, wear, fracture and general deformation. Furthermore, it is aimed at implementing an online monitoring system for machine tools, using a sensor f...
متن کاملMinimization of Burr Height and Tool Wear in Drilling of Aluminium Metal Matrix Composites Using Desirable-Fuzzy Approach
This paper is focused on minimization of the burr height and Tool wear in drilling of Aluminium Metal Matrix Composites(AMMC) using “Desirable-Fuzzy” approach, which is developed by combining the Desirability Function Analysis and Fuzzy Logic. AMMC samples are prepared based on selected material parameters and drilling experiments are conducted on these samples as per Taguchi OA L27 which is de...
متن کاملCAD-based simulations and design of experiments for determining thrust force in drilling operations
Drilling thrust force calculations require a large amount of experimental work, which can be greatly reduced, since an extensively validated CAD-based approach, using the DRILL3D software application, has become available. DRILL3D calculates the thrust force of both the cutting areas of the tool (main edges and chisel edge) simultaneously, which means that every simulation can substitute two se...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Mechanical Design, Systems, and Manufacturing
سال: 2012
ISSN: 1881-3054
DOI: 10.1299/jamdsm.6.885