Monitoring Ion Track Formation Using In Situ RBS/c, ToF-ERDA, and HR-PIXE

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Monitoring Ion Track Formation Using In Situ RBS/c, ToF-ERDA, and HR-PIXE

The aim of this work is to investigate the feasibility of ion beam analysis techniques for monitoring swift heavy ion track formation. First, the use of the in situ Rutherford backscattering spectrometry in channeling mode to observe damage build-up in quartz SiO₂ after MeV heavy ion irradiation is demonstrated. Second, new results of the in situ grazing incidence time-of-flight elastic r...

متن کامل

UHV-ERDA Investigations on Ion Induced Desorption

In heavy ion accelerators the beam line vacuum is effected by lost ions impinging on the beam pipe. Due to ion induced desorption gas is released from the walls into the vacuum. This vacuum degeneration effects the ion beam life time and is a serious luminosity limitation for a heavy ion synchrotron like SIS18. Here we report on a new approach to understand the physics of the ion induced desorp...

متن کامل

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Environmentally-friendly Disposable Heavy Metal Ion Sensors Using Planar Bismuth Microelectrodes for in Situ Environmental Monitoring

978-0-9798064-0-7/μTAS2007/$20©2007CBMS 251 Figure 1: ASV measurement of heavy metal using planar Bi electrode. (a) Pb and Cd start to deposit on the electrode at preconcentration potential; (b) deposited metals form multicomponent alloys with Bi; (c) Cd is first stripped from the electrode, and generates a peak current at its reduction potential, and (d) Pb is stripped off and generates anothe...

متن کامل

Determination of in situ-generated dimethyldioxirane from an aqueous matrix using selected ion monitoring.

There is a growing interest in utilizing in situ-generated dimethyldioxirane (DMDO) as an oxidant for synthetic purposes and bleaching and decontamination applications, but the ability to quantify the organic cyclic peroxide species is often complicated by the presence of other reactive components, peroxymonosulfate and acetone, within the solution matrix. This paper is the first to report the ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Materials

سال: 2017

ISSN: 1996-1944

DOI: 10.3390/ma10091041