Molten Metal Flow Measurement Using Cylinder and Hall Element.
نویسندگان
چکیده
منابع مشابه
FLOW BEHAVIOR OF MOLTEN METAL IN ALUMINUM LFC PROCESS
The effects of gating system and pattern geometry on the metal flow in the lost foam casting (LFC) process have been investigated using glass covered mold and video recording system. Unlike convectional casting process, the type of the gating system showed little effect on fillability in lost foam, but pattern thickness had large effect on mold filling. The mold filling behavior seems to be con...
متن کاملResidual Stresses Measurement of a Quenched Cylinder using Slitting Method
Residual Stress measurement has gained interests among researchers for many years due to its great influence on the structural integrity. Slitting method is one of the destructive techniques that relies on the introduction of an increasing cut to a part containing residual stresses. Similar to all other mechanical strain relief techniques, slitting also suffers from its shortcomings during the ...
متن کاملElectrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method
Electrical resistivity (ER) is a main parameter in the melting processes of glasses. However, its measurement is difficult at high temperatures. In this study the electrical resistivity of different cordierite glass samples in the molten state was measured in the temperature range of 1100˚C to 1550 ˚C using the two-wire method. It was attempted to decrease the electrical resistivity of the glas...
متن کاملresidual stresses measurement of a quenched cylinder using slitting method
residual stress measurement has gained interests among researchers for many years due to its great influence on the structural integrity. slitting method is one of the destructive techniques that relies on the introduction of an increasing cut to a part containing residual stresses. similar to all other mechanical strain relief techniques, slitting also suffers from its shortcomings during the ...
متن کاملSpherical Indentation and Flow Property Measurement-Finite Element Simulation
Previous work by Au, Lucas, Sheckerd & Odette [1] and Haggag and Lucas [2] and others showed that ball indentation testing techniques can be used to evaluate flow properties. More recently Haggag et al [3] have extended and refined the general approach. This work is aimed at assessing the accuracy and reliability of this method based on finite element analysis (FEA) simulations of the ball inde...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2001
ISSN: 0915-1559
DOI: 10.2355/isijinternational.41.396