MOF-Derived Hetero-Zn/Co Hollow Core-Shell TMOs as Anode for Lithium-Ion Batteries
نویسندگان
چکیده
In this work, metal–organic frameworks (MOFs) were used as precursors to prepare Zn/Co oxide with a porous dodecahedral core-shell structure. Herein, low-temperature self-assembly calcination and hydrothermal strategy of imidazole-based Zn-Co-MOF was used. As anode lithium-ion batteries (LIBs), ZnO/Co3O4 has good cycling stability, the specific discharge capacity is stable at about 640 mAh g?1 after 200 cycles, its coulombic efficiency (CE) above 95% first 20 cycles. When current density 0.6 A/g, 420 g?1. This excellent electrochemical performance attributed unique hollow structure heterojunction electrode interface, which improves Li+ storage capacity, increases contact area between electrolyte, overall activity. addition, synergistic effect ZnO Co3O4 also plays an important role in improving performance.
منابع مشابه
Hollow carbon nanospheres/silicon/alumina core-shell film as an anode for lithium-ion batteries
Hollow carbon nanospheres/silicon/alumina (CNS/Si/Al₂O₃) core-shell films obtained by the deposition of Si and Al₂O₃ on hollow CNS interconnected films are used as the anode materials for lithium-ion batteries. The hollow CNS film acts as a three dimensional conductive substrate and provides void space for silicon volume expansion during electrochemical cycling. The Al2O3 thin layer is benefici...
متن کاملAssembled hollow and core-shell SnO2 microspheres as anode materials for Li-ion batteries
SnO2 microspheres with controllable morphology were prepared via a hydrothermal-annealing method. The SnO2 morphology can be tuned by using AlOOH sol and g-Al2O3 as additive. The hollow SnO2 microspheres with incomplete core-shell structure prepared with small amount of g-Al2O3 presented the best cycling performance in Li-ion battery, exhibiting a specific capacity of 374.2 mAh g 1 up to 100 cy...
متن کاملInitial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries
Nanostructured manganese cobalt oxide spinel (MnCo2O4) are prepared by co-precipitation method and calcined at 650 and 750°C. Morphological studies show that by increasing the calcination temperature from 650 to 750°C, morphology of the particles changes from quasi-plate to polyhedral. The MnCo2O4 calcined at 650°C could deliver an initial discharge capacity of 1438 mAh g-1 under current densit...
متن کاملElectrochemical Evaluation of PbO Nanoparticles as Anode for Lithium Ion Batteries (Technical Note)
PbO nanoparticles were synthesized using hydrothermal process. Scanning electron microscopy (SEM) was used in order to investigate of PbO powders. X-ray diffraction (XRD) pattern confirmed β-PbO formation during this process. The crystallite size of the powders was calculated using Scherrer formula about 74.6 nm. Electrochemical evaluation of the PbO nanoparticles as anode for Li-ion batteries ...
متن کاملSynthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries
In this research, using phenolic resin as the precursor of carbon and various amounts of ethylene glycol as a pore former, porous samples of hard carbon were synthesized. Samples were characterized by x-ray diffraction (XRD) and N2 adsorption-desorption methods. Broad diffraction peaks represent the amorphous structure of samples. Moreover, the gas adsorption-desorption curves showed that the a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coatings
سال: 2022
ISSN: ['2079-6412']
DOI: https://doi.org/10.3390/coatings12101487