Modified Bentonite Clay in UV-Curable Coating Applications
نویسندگان
چکیده
منابع مشابه
Can-Printing Process Uses UV-Curable Coating
Approximately 100 billion aluminum cans are produced annually, mainly for the beverage industry. Early technologies for decorating the cans often used solvent-based coatings containing solvents at concentrations of -70% to 75% by volume (Randall 1992). The solvent composition was typically a mixture of aliphatic hydrocarbons, aromatics, ethers, cellosolves, and acetates. Unfortunately, this met...
متن کاملUv-curable Release Coating and Adhesive Formulations Containing Vinylethers
Vinylether monomers offer unique properties for UV/EB curing due to their efficiency as reactive diluents and their ability to undergo both cationic homopolymerization and free-radical copolymerization. The benefits derived from the inclusion of vinylethers into commercial UVcurable epoxysilicone formulations include viscosity reduction, improved cationic photoinitiator miscibility, and lower c...
متن کاملDesign and synthesis of bio-based UV curable PU acrylate resin from itaconic acid for coating applications
UV curable PUA resin was successfully synthesized from polyol based on sustainable resource originated from itaconic acid (IA), isophorone diisocyanate (IPDI) and 2-hydroxyethyl methacrylate (HEMA). A polyol was synthesized by condensation reaction of IA with 16-hexanediol in the presence of p-Toluenesulfonic acid (pTSA). The synthesized PUA resin was characterized for its structural elucidatio...
متن کاملUV-curable Encapsulants for LED
UV cured epoxy systems represent complementary technology to the established heat cured epoxy systems for coating, adhesion and encapsulation of electronic devices. The UV cured epoxy systems offer significant benefits in terms of fast cure and thus very short production cycle time; low stress and better colour due to room temperature cure; process wise no mix ratio problem or anhydride handlin...
متن کاملUV-Curable Coating Process on CMYK-Printed Duplex Paperboard, Part II: Effects of Nano-TiO2 Modification
The influence of TiO2 nano-particles (nano-TiO2) was studied relative to the mechanical and optical properties of CMYK printed paperboard after coating with a UV-curable varnish. Commercial duplex paperboard (glazed grayback paperboard, 230 g/m) was printed with a CMYK offset printing process. Board samples were coated with a nano-TiO2 modified UV-curable varnish at four treatment levels (0, 0....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Journal
سال: 2012
ISSN: 0125-8281
DOI: 10.4186/ej.2012.16.3.13