Modified 8T Design of Charge Sharing Technique for Dynamic Power Reduction
نویسندگان
چکیده
منابع مشابه
8T SRAM Cell Design for Dynamic and Leakage Power Reduction
This paper addresses a, novel eight transistor (8T) CMOS SRAM cell design to enhance the stability and to reduce dynamic and leakage power. For the validation of proposed 8T SRAM cell, compared results with reported data. The parameters used in the proposed cell are comparable to the existing 8T SRAM cell at same technology and design rules. The stability of the proposed cell has been analyzed ...
متن کاملLow Power 10T SRAM Design for Dynamic Power Reduction
The aim of paper is to get over the problem of 6T SRAM cell where it loses its reliability at low supplies due to degraded noise margins. These is done by using a 10T SRAM where the cell uses a charge sharing technique between the transistors so that SRAM could be made more rigid against the noises that can cause damage to the cell at low power supplies and along with that charge sharing betwee...
متن کاملDesign of Low Power Sram Memory Using 8t Sram Cell
Low power design has become the major challenge of present chip designs as leakage power has been rising with scaling of technologies. As modern technology is spreading fast, it is very important to design low power, high performance, and fast responding SRAM (Static Random Access Memory) since they are critical component in high performance processors. The Conventional 6T SRAM cell is very muc...
متن کاملA multi-phase charge-sharing technique without external capacitor for low-power TFT-LCD column drivers
Up to 75% power saving efficiency theoretically with infinite phases, a novel multi-phase charge-recycling technique that doesn't require any, external capacitor for charge conservation is proposed for the dot inversion method to reduce AC power consumption of the.TFT-LCD column driver and is easy to be implemented with simple circuitry. Compared with original circuit (without any low-power sch...
متن کاملapplication of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering
سال: 2014
ISSN: 2320-3765,2278-8875
DOI: 10.15662/ijareeie.2014.0308074