MODIFICATION OF TRACK-ETCHED MEMBRANES BY LOW-TEMPERATURE PLASMA
نویسندگان
چکیده
منابع مشابه
Low-voltage electroosmotic pumps fabricated from track-etched polymer membranes.
Track-etched polymer membranes are used to realize low-voltage electroosmotic (EO) pumps. The nanopores in polycarbonate (PC) and polyethylene terephthalate (PET) membranes were fabricated by the track-etching technique, the pore diameter was controlled in the range of 100 to 250 nm by adjusting the etching time. The results show that these EO pumps can provide high flow rates at low applied vo...
متن کاملHydrophilic modification of polyethersulfone membranes by low temperature plasma-induced graft polymerization
A complete and permanent hydrophilic modification of polyethersulfone (PES) membranes is achieved by argon plasma treatment followed by polyacrylic acid (PAA) grafting in vapor phase. Both Ar plasma treatment alone and post-PAA grafting rendered a complete hydrophilicity to the PES membranes. The hydrophilicity of the membranes treated with only the Ar plasmas is not, however, permanent. In con...
متن کاملProton beam dosimetry by CR-39 track-etched detector
Background: High and intermediate energy protons are not able to form a track in a solid state nuclear track detector (SSNTD) directly. However, such tracks can be formed through secondary particles created during primary radiation nuclear reactions in a SSNTD. Materials and Methods: The protons with primary energies of 9.6 and 30 MeV available at the cyclotron accelerator with corresponding lo...
متن کاملNanopores with controlled profiles in track-etched membranes
The production of the track-etched membranes is well known in membrane science. Latent ion tracks are the result of the passage of swift ions through solid matter, they can be etched selectively in many materials. As a result, conical, cylindrical or other shape channels can be obtained. The increasing interest in polymer track-etched membranes with nano-channels is connected with the developme...
متن کاملCharacterization of track-etched membranes by small-angle x-ray scattering
Track-etched membranes are polymer foils irradiated with swift heavy ions and subsequently wet-etched to create pores by dissolving defects formed along the ion trajectories. Under suitable conditions, the resulting pores are of cylindrical shape and uniform in size. Such membranes are commonly used for filtration or as templates for nanowires, grown inside the pores, e.g., by electrochemical d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA
سال: 2018
ISSN: 2500-3070,0579-2991
DOI: 10.6060/tcct.20186104-05.5740