Modification of surface wettability of sodium ionomer sheets via atmospheric plasma treatment
نویسندگان
چکیده
منابع مشابه
Surface Wettability Studies of PDMS using Flame Plasma Treatment
The flame plasma treatment studied in this thesis was able to oxidize the surface of Polydimethylsiloxane (PDMS) in a fraction of a second. It was found to be a much faster way to modify PDMS surface wettability than the current technologies. The surface wettability of Polydimethylsiloxane (PDMS) treated with flame plasma was studied. The surface wettability was characterized by contact angle m...
متن کاملModification of Glass Surface by Atmospheric Pressure Plasma
A Diffuse Coplanar Surface Barrier Discharge (DCSBS) operating in air at atmospheric pressure has been used to induce changes in the surface properties of glass. The contact angles of water drop on the surface of glass, which were measured by drop shape analysis, decreased markably with plasma treatment for 1 s. With the increasing of the plasma treatment time, the contact angles of the samples...
متن کاملDuplex Surface Treatment of AISI 1045 Steel via Plasma Nitriding of Titanized Layer
In this Study, surface of medium carbon steel (AISI 1045) was modified by titanizing followed by plasma nitriding. Titanizing was performed using pack cementation method, in a pack mixture of ferrotitanium, ammonium chloride and alumina, at 1223 K for 45 and 180 min. Plasma-nitriding was conducted at two temperatures of 803 and 823 K for 5 h, in a gas mixture of 75%N2+25%H2. The samples were c...
متن کاملEffect of Cold Plasma-Surface Modification on Surface Wettability and Initial Cell Attachment
A thin coating of hexamethyldisiloxane and subsequent O2-plasma treatment was performed on mirror-polished titanium in order to regulate the wide range of wettability including 106 and almost 0 degrees of contact angles. The adsorption behavior of fibronectin and albumin in both individual and competitive mode, and initial attachment of fibroblasts and osteoblasts were investigated. Individuall...
متن کاملControl of surface wettability via strain engineering
Reversible control of surface wettability has wide applications in lab-on-chip systems, tunable optical lenses, and microfluidic tools. Using a graphene sheet as a sample material and molecular dynamic simulations, we demonstrate that strain engineering can serve as an effective way to control the surface wettability. The contact angles θ of water droplets on a graphene vary from 72.5◦ to 106◦ ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Engineering & Science
سال: 2012
ISSN: 0032-3888
DOI: 10.1002/pen.23218