Modification of Recycled HDPE Composite with OPEFB Microfibers Through the Melt Blend Extruder Process
نویسندگان
چکیده
منابع مشابه
Composite Fibers from Recycled Plastics Using Melt Centrifugal Spinning
New methods are being developed to enable the production of value-added materials from high-volume, low-cost feedstocks arising from domestic recycling streams. In this work, recycled bottle-grade polyethylene terephthalate, polystyrene, and polypropylene were spun into fibers from the melt using a centrifugal spinning technique. Mono-component fibers and 50/50 blends of each polymer and a 33/3...
متن کاملTwin-Screw Extruder and Effective Parameters on the HDPE Extrusion Process
In the process of polyethylene extrusion polymer material similar to powder or granule is under compression, melting and transmission operation and on base of special form, extrudate has been produced. Twin-screw extruders are applicable in industries because of their high capacity. The powder mixing with chemical additives and melting with thermal and mechanical energy in three zones (feed, co...
متن کاملSintering Process and Mechanical Property of MWCNTs/HDPE Bulk Composite
Studies have proved that increasing polymer matrices by carbon nanotubes to form structural reinforcement and electrical conductivity have significantly improved mechanical and electrical properties at very low carbon nanotubes loading. In other words, increasing polymer matrices by carbon nanotubes to form structural reinforcement can reduce friction coefficient and enhance anti-wear property....
متن کاملExperimental Study of Packing Time and Melt Temperature Effects on Shrinkage of a Thin Sheet Made of Wood-HDPE Composite
Injection molding is one of the most common processes which are used for manufacturing different plastic parts. This method includes 3 continuous steps: filling of the mold, cooling and driving the part out. A wide range of plastic and Non-Plastic materials can be used as raw material in this process. One of the most important advantages of this way of production is that it is very economic. In...
متن کاملPreparation and properties of recycled HDPE/natural fiber composites
Composites based on recycled high density polyethylene (RHDPE) and natural fibers were made through melt blending and compression molding. The effects of the fibers (wood and bagasse) and coupling agent type/concentration on the composite properties were studied. The use of maleated polyethylene (MAPE), carboxylated polyethylene (CAPE), and titanium-derived mixture (TDM) improved the compatibil...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Jurnal IPTEK
سال: 2020
ISSN: 2477-507X,1411-7010
DOI: 10.31284/j.iptek.2020.v24i2.928