Modification of butadiene nitrile rubber surface with carbon coatings containing nitrogen and fluoride
نویسندگان
چکیده
منابع مشابه
Improved curing conditions and mechanical/chemical properties of Nitrile Butadiene Rubber Composites Reinforced with Carbon Based Nanofillers
Multiwall carbon nanotubes (MWCNTs) and carbon nanofibers (CNFs) with contents ranging from 1 to 10 phr (part per hundred parts of rubber) were selected and then characterized to reinforce acrylonitrile butadiene rubber (NBR) based composites. Fabrication of nanocomposites were done by a novel procedure and structural analysis along with variety of mechanical and chemical tests, according to th...
متن کاملPrediction of the lifetime of nitrile-butadiene rubber by FT-IR.
A quantitative measurement method with FT-IR was proposed for a thermal degradation analysis of nitrile-butadiene rubber (NBR). An NBR film was prepared as a model sample on a barium fluoride (BaF2) crystal plate, which was subjected to a heat treatment. The absorbances of various functional groups were measured directly by FT-IR after thermal degradation at high temperatures. By measuring the ...
متن کاملOptimization of mechanical performance of oxidative nano-particle electrode nitrile butadiene rubber conducting polymer actuator.
Present work delivers a systematical evaluation of actuation efficiency of a nano-particle electrode conducting polymer actuator fabricated based on Nitrile Butadiene Rubber (NBR). Attempts are made for maximizing mechanical functionality of the nano-particle electrode conducting polymer actuator that can be driven in the air. As the conducting polymer polypyrrole of the actuator is to be fabri...
متن کاملSurface Modification of Adhesives, Inks and Coatings –
It is well documented that plastics surface modification techniques can greatly improve the acceptance of a wide variety of coatings, adhesives and inks for improved decoration, painting and adhesive assembly. By increasing the hydrophilic characteristics and surface-free energy of plastics, bond strengths can be improved dramatically. It is theorized that interlayer adhesion between decorating...
متن کاملEffect of carbon black and fly ash co-fillers content on mechanical and thermal behaviors of styrene butadiene rubber compounds
Fly ash (FA) is produced as a waste byproduct during the burning process of coal in thermal power plants whose cost is primarily associated to cleaning and transportation. It possesses mechanical properties on account of its constituents like silica and alumina. The use of FA as filler in styrene butadiene rubber (SBR) was of researchers’ interest to reinforce and/or to reduce product cost. In ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer materials and technologies
سال: 2017
ISSN: 2415-7260
DOI: 10.32864/polymmattech-2017-3-3-50-53