Modification of 316L Steel Surface in Ozone Atmosphere
نویسندگان
چکیده
منابع مشابه
Surface Modification of SUS 316L Stainless Steel with Tartaric Acid Derivative-Crosslinked Human Serum Albumin Matrices
The surface of stainless steel (SUS316L) was modified by alternating immersion in a solution of human serum albumin (HSA) and solution of a tartaric acid derivative (TAD). The resulting HSA/TAD-immobilized SUS316L was characterized by means of contact-angle measurement, attenuated total-reflectance Fourier-transform infrared spectroscopy, atomic force microscopy, and X-ray photoelectron spectro...
متن کاملControl of the wetting properties of an AISI 316L stainless steel surface by femtosecond laser-induced surface modification
A simple and effective method without vacuum to control the wetting properties of AISI 316L stainless steel using femtosecond laser pulses at high repetition rate has been developed. Both hydrophilic and hydrophobic surfaces were formed by creating micro-conical structures on the surface with femtosecond laser irradiation in air. The scan speed was found to be an effective parameter in controll...
متن کاملEffect of Ultrasonic Nano-Crystal Surface Modification (UNSM) on the Passivation Behavior of Aged 316L Stainless Steel
Stainless steels have good corrosion resistance in many environments but welding or aging can decrease their resistance. This work focused on the effect of aging time and ultrasonic nano-crystal surface modification on the passivation behavior of 316L stainless steel. In the case of slightly sensitized 316L stainless steel, increasing the aging time drastically decreased the pitting potential, ...
متن کاملHaemocompatibility of Surface Modified AISI 316L Austenitic Stainless Steel Tested in Artificial Plasma
The study comprises evaluation of suitability of passive layer created on the surface of AISI 316L stainless steel for products that are intended to have contact with blood. For that purpose, prior to and after chemical passivation, samples were subject to 7 day exposure in artificial plasma at the temperature of T=37°C. Next, tests of metallic ions infiltration from the surface to the solution...
متن کاملThe Effect of Surface Roughness on the Fretting Corrosion of 316l Stainless Steel Biomaterial Surfaces
The medical device industry is still seeking answers to the mechanically-assisted corrosion (MAC) problem, which becomes increasingly important due to modularity in design. MAC manifests in various forms, some of which are fretting corrosion, crevice corrosion and stress corrosion. Several studies have been conducted to understand the causes and the factors that affect fretting corrosion. Some ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: New Trends in Production Engineering
سال: 2018
ISSN: 2545-2843
DOI: 10.2478/ntpe-2018-0088