Modelling the EB-PVD thermal barrier coating process: Component clusters and shadow masks
نویسندگان
چکیده
منابع مشابه
Erosion, Corrosion and Erosion-Corrosion of EB PVD Thermal Barrier Coatings
Electron beam (EB) physical vapour deposited (PVD) thermal barrier coatings (TBCs) have been used in gas turbine engines for a number of years. The primary mode of failure is attributed to oxidation of the bondcoat and growth of the thermally grown oxide (TGO), the alumina scale that forms on the bondcoat and to which the ceramic top coat adheres. Once the TGO reaches a critical thickness the T...
متن کاملResidual Stresses of Eb-pvd Thermal Barrier Coatings Exposed to High Temperature
The substrate material was nickel-based superalloy (In738LC), and CoNiCrAlY was pressureless plasma-sprayed on the substrate as the bond coating. As the top coating, zirconia with 4 mol% yttria was electron beam-physical vapor deposited (EB-PVD) on the rotating substrate. The rotation speeds in the EB-PVD process were 5, 10 and 20rpm. The specimens were exposed to 1273K in air atmosphere for 20...
متن کاملCVD and PVD coating process modelling by using artificial neural networks
Thin-film coating plays a prominent role on the manufacture of many industrial devices. Coating can increase material performance due to the deposition process. Having adequate and precise model that can predict the hardness of PVD and CVD processes is so helpful for manufacturers and engineers to choose suitable parameters in order to obtain the best hardness and decreasing cost and time of in...
متن کاملCrack propagation in thermal barrier coating systems
Thermal barrier coating systems are used on top of highly stressed components in gas turbines to protect the nickel-based substrates. A well-established thermal barrier coating system consist of the bond-coat (BC) and the thermal barrier coating (TBC). A third layer is grown during service: the thermally grown oxide (TGO) between the BC and the TBC. The coatings fail in service because of diffe...
متن کاملEvaluation of thermal conduction anisotropy on Thermal Barrier Coating
The microstructural analysis of Thermal Barrier Coatings, deposited according to the Air Plasma Spray technology, furnishes information according which a strong orthotropic thermal conductivity is expected to be measured for such a material. Pulsed experiment with a localized heating source and thermographic temperature recording, permit to evaluate both the in-depth and in-plane components of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Surface and Coatings Technology
سال: 2017
ISSN: 0257-8972
DOI: 10.1016/j.surfcoat.2016.12.054