Modelling Test of Autothermal Gasification Process Using CFD
نویسندگان
چکیده
منابع مشابه
CFD modelling as an integrated part of multi-level simulation of process plants: semantic modelling approach
In this paper, we present our computational fluid dynamics (CFD) modelling and simulation environment, which is designed to be suitable for integration to a largescale system level simulation tools for industry process simulation of plants, such as Apros 6 software. We discuss about the coupling possibilities of these simulations and further concentrate on the description of our preprocessing, ...
متن کاملKinetic Modelling of a Pyrolysis – Gasification Reactor
Biomass is of growing interest as a secondary energy source. Biomass could be converted to energy especially by pyrolysis or gasification. Understanding the mechanism and the kinetics of biomass pyrolysis and gasification could be the key to the design of industrial devices capable of processing vast amounts of biomass feedstock. There are multiple reactions describing the decomposition of biom...
متن کاملPrediction of Dust Loss from Conveyors Using Cfd Modelling
Dust lift-off from conveyors forms a significant environmental and operational problem for operators in the mining, power generation and process industries. One means of reducing dust lift-off is to provide airflow deflectors or other aerodynamic modifications to the conveyor. A CFD model has been developed to take into account the effect of wind direction, velocity and conveyor guarding on the...
متن کاملNumerical Modelling for Process Investigation of a Single Coal Particle Combustion and Gasification
Combustion and Gasification are commercial processes of coal utilization, and therefore continuous improvement is needed for these applications. The difference between these processes is the reaction mechanism, in the case of combustion the reaction products are CO2 and H2O, whereas in the case of gasification the products are CO, H2 and CH4. In order to investigate these processes further, a s...
متن کاملOptimization of Synthesis Gas (autothermal) Reactor in Methanol Production Process Using Natural Gas as Feed Stock
Optimization modeling and simulation of the autothermal reactor in the methanol production process was effectively done using the quasi –Newton scheme of optimization in Aspen Hysys 2006.5. The primary variables selected for this modeling were heat flow value of the following: Steam1;steam2; coolant1; coolant2; coolant3. After running the process optimization simulation, total cost was minimize...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Archives of Mining Sciences
سال: 2017
ISSN: 1689-0469
DOI: 10.1515/amsc-2017-0019