Modelling tensile force oscillation during the tensile test of PET specimens
نویسندگان
چکیده
منابع مشابه
Critical Strain Energy Density from Tensile Specimens
Fracture has always been a serious concern in the design and repair of steel structures such as ships. Because of these concerns, much research has been ongoing in the causes of fractures and in ways which they could be predicted and thus prevented. The objective of this study was to flnd, test and evaluate a method for measuring tht:: critical strain energy density with tensile specimens. Plas...
متن کاملHigh-speed tensile test instrument.
A novel high-speed tensile test instrument is described, capable of measuring the mechanical response of elastomers at strain rates ranging from 10 to 1600 s(-1) for strains through failure. The device employs a drop weight that engages levers to stretch a sample on a horizontal track. To improve dynamic equilibrium, a common problem in high speed testing, equal and opposite loading was applied...
متن کاملComputational modelling of thermal impact welded PEEK/steel single lap tensile specimens
In this contribution, an interfacial traction-separation-law based on elastoplasticity with Lemaitre-type-damage is applied. Related constitutive equations are decoupled with respect to a local orthonormal frame such that the stress–strain response is controlled independently in these directions. The constitutive traction-separation-law is applied to the simulation of thermal impact welded (TIW...
متن کاملTensile and Creep Testing of Sanicro 25 Using Miniature Specimens
Tensile and creep properties of new austenitic steel Sanicro 25 at room temperature and operating temperature 700 °C were investigated by testing on miniature specimens. The results were correlated with testing on conventional specimens. Very good agreement of results was obtained, namely in yield and ultimate strength, as well as short-term creep properties. Although the creep rupture time was...
متن کاملHot Deformation Behavior of Haynes 25 by the Hot Tensile Test
In the present work, hot tensile behavior of Haynes 25 Co-base alloy was investigated in the temperature range of 950-1200 ˚C and 0.1 s-1. Thermodynamic calculations showed that M23C6 and M6C carbides were stable below 1000 ˚C and above 1050 ˚C, respectively. Stress-strain curves also indicated an unusual trend of strain fracture. It was observed that with increasing temperature from 950 to 105...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Express Polymer Letters
سال: 2009
ISSN: 1788-618X
DOI: 10.3144/expresspolymlett.2009.10