Modelling strain penetration effects in RC walls with smooth steel bars
نویسندگان
چکیده
منابع مشابه
non-linear study of various slit shear walls in steel structures
seismic retrofit strategies have been developed in the past few decades following the introduction of new seismic provisions and the availability of advanced materials and methods. it can be observed that new approaches to deal with more lateral forces are more innovative and more energy absorbent. in line with this, there is a growing trend toward the use of steel shear walls as a system with ...
15 صفحه اولModelling shear-flexure interaction in equivalent frame models of slender RC walls
Experimental results for quasi-static cyclic tests on reinforced concrete (RC) walls have shown that shear deformations can constitute a significant ratio of the total deformations when the wall is loaded beyond the elastic regime. For walls, which form a stable flexural hinge at their base, the ratio of shear to flexural deformations remains approximately constant over the entire range of impo...
متن کاملCorrosion Resistance of a Sand Particle-Modified Enamel Coating Applied to Smooth Steel Bars
The protective performance of a sand particle-modified enamel coating on reinforcing steel bars was evaluated in 3.5 wt% NaCl solution by electrochemical impedance spectroscopy (EIS). Seven percentages of sand particles by weight were investigated: 0%, 5%, 10%, 20%, 30%, 50% and 70%. The phase composition of the enamel coating and sand particles were determined with the X-ray diffraction (XRD) ...
متن کاملA New Approach for Numerical Analysis of the RC Shear Walls Based on Timoshenko Beam Theory Combined with Bar-Concrete Interaction
In this paper, a new approach for nonlinear numerical modelling of the reinforced concrete shear walls with consideration of bar-concrete interaction and shear deformation is proposed. Bar and concrete stress-strain relations, the bar-concrete interaction, the shear stress-strain relation and, also, their cyclic behavior including the strength degradation and stiffness degradation are adopted a...
متن کاملSurface Quality in Dry Machining of 55Cr3 Steel Bars
Lubricant and coolant can improve surface roughness in machining. In addition of ecological harms, thermal shock of coolant or lubricant may affect the surface integrity especially on surface residual stresses and micro-crack nucleation. Dry machining is ecologically desirable and it is considered as a necessity for manufacturing enterprises in the recent years. 55Cr3 steel grade is steel with ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Magazine of Concrete Research
سال: 2019
ISSN: 0024-9831,1751-763X
DOI: 10.1680/jmacr.18.00052