Modelling steady-state thermal behaviour of double thermal network pipes
نویسندگان
چکیده
منابع مشابه
On modeling thermal steady state control of thermal systems
́ Abstract. A new modeling approach for steady-state fluid flow analysis of networked thermal systems with temperature control devices is proposed in this paper. The problem of temperature control is crucial for the design and analysis of such thermal systems as air conditioning systems of data centers, for their control as well as providing the best data center performance and reliability. It i...
متن کاملSteady - state thermal characteristics of AMR
Tape storage drives use lithographically deposited anisotropic magnetoresistive (AMR) sensors to read magnetic transitions written on tape. The read-back signal and the reliability of an AMR sensor are both affected by sensor temperature. Because current passes through the sensor, it is subject to joule heating, dependent on both the geometry of the sensor and the thermal conductivities of its ...
متن کاملThermal Conductivity of Magnesium Oxide From Absolute, Steady-State Measurements
The thermal conductivity of polycrystalline magnesium oxide has been measured over the temperature range from 400 K to 1300 K using a modified guarded-hot-plate design. Three different thicknesses of specimens having 93 % of theoretical density were tested to verify the operation, accuracy, and reproducibility of our apparatus. The measured thermal conductivity ranges from 30 W · m-1 · K-1 down...
متن کاملCharacterization of thermal transport in micro/nanoscale wires by steady-state electro-Raman-thermal technique
In this work, a novel steady-state electro-Ramanthermal (SERT) technique is developed to characterize the thermal transport in one-dimensional micro/nanoscale materials. The SERT technique involves steady-state joule heating of a suspended sample and measuring its middle point temperature based on the temperature dependence of the Raman shift peak intensity. The thermal conductivity is determin...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Thermal Sciences
سال: 2017
ISSN: 1290-0729
DOI: 10.1016/j.ijthermalsci.2017.03.026