MODELLING ROCK MASS IMPROVEMENT USING ROCK BOLTS
نویسندگان
چکیده
منابع مشابه
Sensitivity Analysis of Stress and Cracking in Rock Mass Blasting using Numerical Modelling
Drilling and blasting have numerous applications in the civil and mining engineering. Due to the two major components of rock masses, namely the intact rock matrix and the discontinuities, their behavior is a complicated process to be analyzed. The purpose of this work is to investigate the effects of the geomechanical and geometrical parameters of rock and discontinuities on the rock mass blas...
متن کاملevaluation of rock mass deformability
One of the most important effective parameters in design of engineering structures is deformability of rock mass. Benchmark of rock mass deformability is the deformation modulus that directly or indirectly obtained. Since the determination of rock mass deformation modulus indirect method by in-situ tests is time-consuming, costly and difficult from executive operations aspect, so it’s correctly...
متن کاملLaboratory and Numerical Modelling of a Jointed Rock Mass
Laboratory tests were performed on 54 large size specimens of jointed rock mass under uniaxial loading conditions. Based on this experimental study, a methodology has been suggested to estimate strength and tangent modulus of rock masses through a weakness coefficient. The methodology involves mapping of joints in the field and laboratory testing of intact rock specimens to arrive at rock mass ...
متن کاملStress Measurement in Rock Mass
Understanding and estimating the rock stress state has become increasingly important as nowadays numerical models are mainly used as rock engineering design tool. The objective in determining rock stresses may, in many cases, be seen as an interactive process. The type of data needed may change, depending on at what stage an underground project is in. Further more, preliminary measurements may ...
متن کاملThree dimensional rock-scene modelling using dense stereo reconstruction
A dense stereo reconstruction technique for extracting a 3D model of a rock scene from a pair of images is presented. The technique falls under the conventional approach of extracting 3D information from a calibrated stereo pair. In this work, a single camera that is under going linear motion with respect to the scene is used. As far as correspondence analysis is concerned, a simple method for ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Polytechnica CTU Proceedings
سال: 2017
ISSN: 2336-5382
DOI: 10.14311/app.2017.10.0043