MODELLING OF WAVE OVERTOPPING LOADS ON A BUILDING BEHIND A RUBBLE MOUND BREAKWATER USING A 2DV NUMERICAL MODEL AND THEIR APPLICATION IN BUILDING DESIGN
نویسندگان
چکیده
منابع مشابه
Rubble Mound Breakwater: Run-Up, Reflection and Overtopping by Numerical 3D Simulation
From the numerical point of view, the complexity of the fluid dynamic processes involved has so far hindered the direct application of Navier-Stokes equations within the armour blocks, due to the complex geometry and the presence of strongly non stationary flows, free boundaries and turbulence. In the present work the most recent CFD technology is used to provide a new and more reliable approac...
متن کاملNumerical Simulation of Wave Overtopping Over Composite Berm Breakwater
Breakwaters have changed a lot during their design history. Overtopping is an important parameter that its evaluation and reduction has always been noticed. In this study, the wave overtopping of composite berm breakwater as a new conceptual structure has been investigated numerical modeling was performed using FLOW-3D software. Then, based on a laboratory model conducted by Losada et al, cali...
متن کاملArtificial Intelligence and Rubble-Mound Breakwater Stability
Breakwaters are coastal structures constructed to shelter a harbour basin from waves. There are two main types: rubble-mound breakwaters, consisting of various layers of stones or concrete pieces of different sizes (weights), making up a porous mound; and vertical breakwaters, impermeable and monolythic, habitually composed of concrete caissons. This article deals with rubble-mound breakwaters....
متن کاملParametric Study on Wave Interaction with a Porous Submerged Rubble Mound Breakwater Using Modified N-S Equations and Cut-Cell Method
In this paper wave transformation in a submerged sloped breakwater and its hydraulic performance was simulated by developing a numerical model in Fortran. The code was established by combining porous flow and a two-phase model using VOF method. Modified Navier-Stokes and k-ε equations implemented to the model to simulate the flow in porous media. Cut cell method was modified to simulate...
متن کاملمدلسازی عددی نوسانات سطح آب و تغییرات فشار منفذی در بدنه موج‌شکن‌های توده سنگی سنتی
When studying the structural response of rubble mound breakwaters to wave loading, the knowledge of water surface fluctuations, pore pressure variations and related wave attenuation inside the porous structure is important since the pore pressures affect most responses, such as wave run-up, wave overtopping, reflections, transmission and the hydraulic and geotechnical stability of the breakwate...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coastal Engineering Proceedings
سال: 2020
ISSN: 2156-1028,0589-087X
DOI: 10.9753/icce.v36v.structures.31