منابع مشابه
Analysis of a gear train using finite element modelling
Here the theoretical maximum contact stress is calculated by Hertz equation. Also the finite element analysis of spur gear is done to determine the maximum contact stress by ANSYS 14.5. It was found that the results from both Hertz equation and Finite Element Analysis are comparable. From the deformation pattern of steel and grey cast iron, it could be concluded that difference between the maxi...
متن کاملAnalysis of Roll Wear in Reshaping Using Finite Element Simulation
Reshaping process is a widely used method for producing tubes with non-circular cross sections. Owing to the friction between pipe and rolls, initial round pipe moves forward and consequently, it gradually formed into square or rectangular one. In practice, geometric profile of the rolls will be changed after a while. These changes would be detrimental the production of faultless products. Ther...
متن کاملFinite Element Analysis of Reinforced RC Bracket Using CFRP Plates
CFRP composites have unique application qualities such as high resistance and durability to environmental conditions, having relatively low weight and easy to install in strengthening concrete structure elements. The brackets should be strengthen sufficiently if they are not calculated and implemented well. Application of the CFRP is one of the methods for such purposes. The study involves usin...
متن کاملFlexural Strengthening of Deficient Reinforced Concrete Beams with Post-Tensioned Carbon Composites using Finite Element Modelling
The application of external post-tensioned steel bars as an effective way to strengthen an existing bridge has been so far used in many different countries. In recent decades, however, they have been replaced by bars made from Carbon Fiber Reinforced Polymer (CFRP), as a material with high tensile strength and corrosion resistance, to address several concerns with steel bars such as their appli...
متن کاملInitial blank design of deep drawn orthotropic materials using inverse finite element method
In this work, an inverse finite element formulation was modified for considering material anisotropy in obtaining blank shape and forming severity of deep drawn orthotropic parts. In this procedure, geometry of final part and thickness of initial blank sheet were known. After applying ideal forming formulations between material points of initial blank and final shape, an equation system was obt...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials and Structures
سال: 2006
ISSN: 1359-5997,1871-6873
DOI: 10.1617/s11527-005-9010-y