Modelling of powder die compaction for press cycle optimization
نویسندگان
چکیده
منابع مشابه
Benefits of Die Wall Lubrication for Powder Compaction
The achievement of high density at reasonable cost would be a definite advantage for the production of P/M components requiring high static and dynamic properties. The use of the electrostatic die wall lubrication technique appears as a very attractive route to promote densification. By reducing the level of friction at die walls, this technique should have the potential to also reduce density ...
متن کاملNumerical Methods for Predicting Roll Press Powder Compaction Parameters
Large numbers of cohesive powders are compacted using a roll press. The principle of compaction is that particulate materials become a compact when they are subjected to high pressure. Experimental work was carried out on pharmaceutical powders [1] to determine the influence of operating parameters on the roll process compaction. Theses parameters are determined for a given powder and must be m...
متن کاملConstitutive Equation for Powder Compaction Incorporating Powder Charecteristics
The increasing importance of powdered materials fabrication has led to an increasing emphasis on the understanding of the powder behavior during compaction. During compaction, a powder mass undergoes densification owing to various mechanisms, i.e. sliding, rotation, deformation and/or fracturing of the constituent particles. These densification mechanisms are very dependent upon the powder char...
متن کاملOptimization of die geometry for Tube Channel Pressing
Since tubes have numerous industrial applications, different attempts are focused on the Severe Plastic Deformation (SPD) processes of tubes. As an illustration, Tube Channel Pressing (TCP) is an attractive process for this purpose since it can be used for processing of different sizes of tubes. However, more attempts are needed to improve the outcomes of TCP. For example, imposing of greater s...
متن کاملCompaction of Commercially Pure Titanium Powder by Friction Powder Compaction Process
A new friction powder compaction (FPC) process is introduced for compacting commercially pure titanium powder. The FPC process is very simple and energy-efficient since it requires only a rotating tool plunged into an aluminum plate with a hole filled with titanium powder, and no external heat source is necessary. The sintering of the powder is mainly achieved by the friction heat and pressing ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: EPJ Nuclear Sciences & Technologies
سال: 2016
ISSN: 2491-9292
DOI: 10.1051/epjn/2016018