Modelling and simulation techniques for forced convection heat transfer in heat sinks with rectangular fins
نویسندگان
چکیده
منابع مشابه
Modelling and simulation techniques for forced convection heat transfer in heat sinks with rectangular fins
This paper provides a comprehensive description of the thermal conditions within a heat sink with rectangular fins under conditions of cooling by laminar forced convection. The analysis, in which increasing complexity is progressively introduced, uses both classical heat transfer theory and a computational approach to model the increase in air temperature through the channels formed by adjacent...
متن کاملNumerical simulation of laminar convection heat transfer from an array of circular perforated fins
The present paper reports the laminar fluid flow and heat transfer of a heated array of circular-perforated and solid fins mounted over a flat surface using the finite-volume method. One to four circular cross-sectional perforations are made along the length of the fins. The SIMPLE algorithm is used for pressure-velocity coupling and the second order upwind technique is employed to discreti...
متن کاملHeat Transfer Study of Perforated Fin under Forced Convection
Fins are protrusions on a heat transfer surface to augment heat transfer rate from it. The increase in area exposed to convection in case of finned surfaces results in increased heat transfer rate. In this study heat transfer characteristics of a pin fin with perforation is numerically analyzed. A pin fin is fabricated and experiments are done under forced convection conditions. The experimenta...
متن کاملAnalysis of variance of nanofluid heat transfer data for forced convection in horizontal spirally coiled tubes
In the present study, an experimental study is carried out to investigate the effect of adding Al and Cu nanoparticles to the base fluid (water) on the heat transfer rate in a spirally coiled tube. The spirally coiled tube is fabricated from the straight copper tube with the inner and outer coil diameters of 100 and 420 mm, respectively. The experiments have been done for water and two types of...
متن کاملForced Convection Heat Transfer of Giesekus Viscoelastic Fluid in Concentric Annulus with both Cylinders Rotation
A theoretical solution is presented for the forced convection heat transfer of a viscoelastic fluid obeying the Giesekus constitutive equation in a concentric annulus under steady state, laminar, and purely tangential flow. A relative rotational motion exists between the inner and the outer cylinders, which induces the flow. A constant temperature was set in both cylinders, in this study. The f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Simulation Modelling Practice and Theory
سال: 2009
ISSN: 1569-190X
DOI: 10.1016/j.simpat.2009.02.007