Modelling and Process Analysis of Resistance Spot Welding On Aluminium Alloy AA6063 T6 Sheets Used In Transportation Applications
نویسندگان
چکیده
منابع مشابه
Analysis of Resistance Spot Welding Process Parameters Effect on the Weld Quality of Three-steel Sheets Used in Automotive Industry: Experimental and Finite Element Simulation
In the present research, the effects of spot-welding process parameters on the nugget diameter and electrode penetration depth of spot-welded joints were investigated. To achieve this, a spot-welded joint of three-thin sheet low carbon steels (same thicknesses of 0.8 mm) was simulated as an electerical-thermal-mechanical coupling of 3D finite element model. After validating the finite element s...
متن کاملEffect Of Process Parameters On The Strength Of Aluminium Alloy A5052 Sheets Joint Welded By Resistance Spot Welding With Cover Plates
Resistance spot welding (RSW) is the most popular joining technique used by automotive industries for the manufacture of automobile body structure. In automobile industries, the weight saving effect of replacing steel parts is an important factor in reducing fuel consumption and increasing speed and natural resources savings. In this study, A5052 aluminium alloy sheet having 1 mm thickness were...
متن کاملNugget formation and growth during resistance spot welding of aluminium alloy 5182
Surface interaction at the worksheet/worksheet interface during resistance spot welding of aluminium alloy 5182 with spherical tip electrodes was investigated. Oxide layer cracking and nugget formation were focused. Both experimental work and finite element analysis were employed to explain the contact behaviour at this interface. It was found that sheet separation and thus bending occurred dur...
متن کاملEvaluation of mechanical properties of nanostructured Al 6061 alloy weldment during resistance spot welding process
In this study, The Al 6061 alloy sheets were produced by Cryorolling process and then were welded by resistance spot welding method. In this regard, the solution treated Al 6061 alloy cryorolled subsequently up to 90% reduction in thickness to produce nanostructure alloy. The cryorolled sheets were then subjected to aging treatment (130˚C-30h) in order to obtain simultaneous strength and ductil...
متن کاملEffects of temperature gradient magnitude on bending angle in laser forming process of aluminium alloy sheets
Laser forming is a thermal forming process which uses laser beam irradiation to produce the desired final forms. In this article, the effect of temperature gradient across Al 6061-T6 aluminum sheets on bending angle is studied. Input parameters including laser power, scan velocity, beam diameter, and sheet thickness are the effective process parameters which influence the temperature gradient....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2017
ISSN: 2321-9653
DOI: 10.22214/ijraset.2017.11175