Modelling and experimental validation of thermoset resin curing during pultrusion
نویسندگان
چکیده
منابع مشابه
Pulsed photoacoustic studies of thermoset curing reaction
A pulsed photoacoustic technique was used for generation of ultrasonic pulses along with optical detection inside a transparent polymer resin undergoing a curing reaction. The changes in acoustic parameters during the solidification process was measured and were found to agree with the accepted general model for the kinetics of the curing reaction for polyester and epoxy resins. The advantages ...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Optimal Curing for Thermoset Matrix Composites: Thermochemical and Consolidation Considerations
A design sensitivity method is used to find optimal autoclave temperature and pressure histories for curing of thermoset-matrix composite laminates. The method uses a finite element simulation of the heat transfer, curing reaction, and consolidation in the laminate. Analytical sensitivities, based on the direct differentiation method, are used within the finite element simulation to find the de...
متن کاملOptimal Curing for Thermoset Matrix Composites: Thermochemical Considerations
A design sensitivity analysis is used to optimize the applied wall temperature vs. time in autoclave curing for thermoset matrix composites. The calculation minimizes the cure time and obeys a maximum temperature constraint in the composite. The transient, coupled thermal and cure problem is solved by a finite element method. Design sensitivity information is extracted efficiently from this pri...
متن کاملPultrusion manufacturing process development by computational modelling and methods
This paper deals with the modelling and development of computational schemes to simulate pultrusion processes. Two different computational methods, finite differences and elements, are properly developed and critically analyzed. The methods are applied to a model, implemented with suitable boundary conditions, proposed in this paper. Simulations, compared with experimental data available in the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2021
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/1129/1/012011