MODELLING AND EXPERIMENTAL INVESTIGATION OF COPPER-ZINC ALLOY USING SPLIT-SPLIT PLOT DESIGN
نویسندگان
چکیده
This study focused on the modelling and experimental investigation of Copper-Zinc alloy using Split-split plot design. The effects process parameters such as percentage by volume material, material type (copper zinc), pressure their interactions mechanical properties produced copper-zinc split-split design was investigated. examined in this include; tensile strength, modulus elasticity, shear hardness. values obtained from evaluation these were imputed into analytical to obtain its numerical designs. Interactive model for also developed study. sum squares (SS) mean square (MS) calculated designs Fisher’s ratio (F_cal) values. results at significant value 0.05 ranges -57.70 8.50, presented analysis variance (ANOVA) table. shows that there is strong interraction between pressure, zinc copper production zinc-copper manufacturing industries.
منابع مشابه
Multi-response optimization of Artemia hatching process using split-split-plot design based response surface methodology
A novel method, BBD-SSPD is proposed by the combination of Box-Behnken Design (BBD) and Split-Split Plot Design (SSPD) which would ensure minimum number of experimental runs, leading to economical utilization in multi- factorial experiments. The brine shrimp Artemia was tested to study the combined effects of photoperiod, temperature and salinity, each with three levels, on the hatching percent...
متن کاملThe Optimal Design of Blocked and Split-Plot Experiments
A solution to get the problem off, have you found it? Really? What kind of solution do you resolve the problem? From what sources? Well, there are so many questions that we utter every day. No matter how you will get the solution, it will mean better. You can take the reference from some books. And the the optimal design of blocked and split plot experiments 1st edition is one book that we real...
متن کاملAssessing The Adequacy Of Split-Plot Design Models
This paper assesses the adequacy of model fit of the split-plot design models that is the whole plot (WP) sub design model with WP error and the split-plot (SP) sub design model with SP error using the four measures of adequacy of fit for the WP and SP sub designs proposed by Almimi et al. [3] which are the R 2 , R 2 -Adjusted, Prediction Error Sum of Square (PRESS) and R 2 -Prediction statisti...
متن کاملOptimal Cross-Validation Split Ratio: Experimental Investigation
Cross-validation is a widespread method for assessing the generalisation ability of a model in order to tune a regularisation parameter or other hyper-parameters of a learning process. The use of cross-validation requires to set yet an additional parameter, the split ratio. Few texts have investigated theoretically the asymptotic setting of this ratio, and no consensus has emerged. In this cont...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International journal of engineering and innovative research
سال: 2021
ISSN: ['2687-2153']
DOI: https://doi.org/10.47933/ijeir.905756