Modeling the thermal shock induced cracking in ceramics
نویسندگان
چکیده
منابع مشابه
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولThermal-birefringence-induced depolarization in Nd:YAG ceramics.
The thermal-birefringence effect in Nd(3+) -doped YAG ceramics has been investigated. The amount of depolarization induced by thermal birefringence in Nd:YAG ceramics is nearly the same as that in (111)-cut single crystals at the same Nd(3+) concentration. However, depolarization becomes larger as the Nd(3+) concentration increases, even at the same absorbed pump power.
متن کاملFracture toughness and thermal shock of tool and turbine ceramics
The behaviour of some commercial tool carbides and turbine ceramics has been investigated in regard to resistance to crack initiation, crack propagation and retained strength after thermal shock. New data are provided, particularly measurements of the fracture toughness of these materials at actual operating temperatures (up to 1200 ~ C). Many of the materials did not follow the generally accep...
متن کاملTHERMAL SHOCK OF REFRACTORIES
Being brittle and having low thermal conductivity, refractories suffer damage and sometimes fail in service as a result of thermal shock. While the approach of those making fine-grained technical ceramics is to make their products sufficiently strong to withstand thermal stresses the refractory technologist is more cunning. He uses, often little known, devices to provide resistance to thermal s...
متن کاملUnderstanding Nanoscale Thermal Conduction and Mechanical Strength Correlation In High Temperature Ceramics With Improved Thermal Shock Resistance For Aerospace Applications
Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing this collection of information. Send comments regarding this burden estimate or any other aspect of this coll...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the European Ceramic Society
سال: 2020
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2019.11.071