Modeling the Processing Window for Iron Enrichment in Hot-dip Galvannealed Coatings on IF Steel Sheets.
نویسندگان
چکیده
منابع مشابه
Formation oF outburst struCturE in hot dip galvannEalEd Coatings on iF stEEls
Rapid development of automotive industry brings also increased requirements for sheets properties, involving relatively high strength and good formability together with excellent corrosion resistance. Increasing requests for corrosion resistance lead to the production of coated car parts, protected mainly by zinc coatings. Whereas, majority of European producers of passenger cars use preferenti...
متن کاملOptimization of Hot Workability in Ti-IF Steel by Using the Processing Map
Processing map for hot working of Ti-IF steel has been developed in the temperature range of 750 to 1100 °C and strain rate of 0.01 to 100 s-1. This map in the austenite region exhibits a single domain with a peak efficiency of 45% occurring at 1025 °C and strain rate of 0.02 s-1. The domain extends over the temperature range of 1000 to 1100 °C and strain rate range of 0.01 to 1 s-1. The true s...
متن کاملDESCRIPTION OF STRUCTURE OF Fe-Zn INTERMETALIC COMPOUNDS PRESENT IN HOT-DIP GALVANIZED COATINGS ON STEEL
P. Pokorny, J. Kolisko, L. Balik – Czech Technical University – Klokner Institute, Prague, Czech Republic P. Novak – Institute of Chemical Technology, Prague, Czech Republic The article is describing formation, composition, morphology and crystallographic characteristics of intermetalic compounds Fe Zn present in the coating formed during the process of low-temperature hot-dip galvanizing of ca...
متن کاملElectron Diffraction Study on Fe–Zn intermetallic Phase of a Galvannealed IF Steel Sheet
In order to investigate the structure of Fe–Zn phase in a commercial galvannealed IF steel sheet, the electron diffraction and composition of phase in a commercial galvannealed IF steel sheet were studied by transmission electron microscope (TEM) and X-ray energy dispersive spectroscopy (EDX). The cross-sectional TEM specimen was prepared using focused ion beam (FIB) technique which was also in...
متن کاملoptimization of hot workability in ti-if steel by using the processing map
processing map for hot working of ti-if steel has been developed in the temperature range of 750 to 1100 °cand strain rate of 0.01 to 100 s-1. this map in the austenite region exhibits a single domain with a peak efficiencyof 45% occurring at 1025 °c and strain rate of 0.02 s-1. the domain extends over the temperature range of 1000to 1100 °c and strain rate range of 0.01 to 1 s-1. the true stre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 1999
ISSN: 0915-1559
DOI: 10.2355/isijinternational.39.1204