Modeling the Dynamic Recrystallization and Flow Curves Using the Kinetics of Static Recrystallization

Mathematical Modeling of Single Peak Dynamic Recrystallization Flow Stress Curves in Metallic Alloys

Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test

In this work dynamic recrystallization behavior of AISI 403 martensitic stainless steel was studied using hot compression tests over temperature range of 900 C -1200 C and strain rate range of 0.001 s-1 - 1 s-1. The obtained flow curves showed that the hot compression behavior of the alloy is controlled by dynamic recrystallization. The flow stress and strain corresponding to the critical, pe...

Approaches to Modeling of Recrystallization

Control of the material microstructure in terms of the grain size is a key component in tailoring material properties of metals and alloys and in creating functionally graded materials. To exert this control, reliable and efficient modeling and simulation of the recrystallization process whereby the grain size evolves is vital. The present contribution is a review paper, summarizing the current...

PREDICTION OF CRITICAL STRESS AND STRAIN FOR THE ONSET OF DYNAMIC RECRYSTALLIZATION IN PLAIN CARBON STEELS

The aim of the present study is the prediction of critical conditions (including critical strain and flow stress) for the initiation of dynamic recrystallization during thermo-mechanical processing of plain carbon steels. For this propose, torsion tests were conducted at different temperature (1050, 1100 and 1150˚C) and strain rates (0.002, 0.02 and 0.2/s). All flow curves showed a peak st...

Texture-dependent Measurement of Recrystallization Kinetics Using Electron Backscatter Diffraction

Partially recrystallized samples of 5352 aluminum alloy and pure titanium were sectioned and characterized with automated electron backscatter diffraction (EBSD) in a scanning electron microscope. Pixels were partitioned into recrystallized (annealed state) and unrecrystallized (deformed state) using a criterion based on the confidence index (CI) and the diffraction pattern quality (IQ). Unrecr...