Modeling the ductile damage process in commercially pure titanium
نویسندگان
چکیده
منابع مشابه
Enhanced superplasticity in commercially pure titanium alloy
The superplasticity of commercially pure titanium alloy at high temperature was studied and the dynamic recrystallization phenomenon of the alloy was investigated by using electron back scattered diffraction. A two-step deformation method was used to increase the ductility of the alloy from 188% to 243%. 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
متن کاملDental implant materials: commercially pure titanium and titanium alloys.
Manufacturers use six different titanium-based biomaterials to fabricate dental implants. Each of these materials, including four grades of commercially pure titanium and two titanium alloys, has distinct mechanical and physical properties. Clinicians should recognize these differences for optimal treatment planning and patient care.
متن کاملINVESTIGATION ON THE EFFECTS OF MAGNETIC FIELD ON BROMIDE-INDUCED PITTING OF COMMERCIALLY PURE TITANIUM
Abstract: In chloride salt solutions, titanium alloys exhibit reasonably high pitting potentials as high as +10 V (vs. Ag/AgCl) at room temperatures. On the other hand, anodic pitting potentials are significantly lower in bromide solutions. In this study, pitting corrosion of commercially pure titanium in aqueous NaBr solution of 0.1 M concentration at room temperature was studied and the e...
متن کاملMorphological studies on machined implants of commercially pure titanium and titanium alloy (Ti6Al4V) in the rabbit.
The aim of this study was to evaluate the bone response to commercially pure titanium grade I and titanium alloy grade V (90% Ti, 6% Al, and 4% V, depicted Ti6Al4V) after 8 weeks in rabbit tibia. Interference microscopy and scanning electron microscopy were used for surface analyses. Transmission electron microscopy (TEM) was used for evaluation of surface crystallinity and chemistry after prep...
متن کاملCompaction of Commercially Pure Titanium Powder by Friction Powder Compaction Process
A new friction powder compaction (FPC) process is introduced for compacting commercially pure titanium powder. The FPC process is very simple and energy-efficient since it requires only a rotating tool plunged into an aluminum plate with a hole filled with titanium powder, and no external heat source is necessary. The sintering of the powder is mainly achieved by the friction heat and pressing ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Solids and Structures
سال: 2016
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2016.04.031