Modeling the Bending and Recovery Behaviour of Woven Fabrics

Filtration behaviour of woven and nonwoven fabrics

The filtration behaviour of woven and nonwoven fabrics at different air flow rate, dust feed rate, dust loading, time intervals and dust particles has been studied. It is observed that the pressure drop increases with the increase in airflow rate for both the woven and nonwoven filters. In general, the pressure drop in case of woven filter is found to be higher than that in case of nonwoven fil...

Multifunctional graphene woven fabrics

Tailoring and assembling graphene into functional macrostructures with well-defined configuration are key for many promising applications. We report on a graphene-based woven fabric (GWF) prepared by interlacing two sets of graphene micron-ribbons where the ribbons pass each other essentially at right angles. By using a woven copper mesh as the template, the GWF grown from chemical vapour depos...

Woven Fabrics Surface Quantification

Applying Fuzzy Logic Model for Bending Rigidity Evaluation of Woven Fabrics

Evaluation of the Shearing Properties of Woven Fabrics: Rated Force

This paper introduces a very simple way to evaluate low stress shearing properties of woven fabrics with the advantages of simplicity and easy accessibility. A 200-gram load is applied on small portion of the sample instead of applying the load overall width of the fabric. As a result, buckling of the fabric will happen and the loading-unloading curve will show the behavior of the fabric during...