Modeling Texture Change during the Recrystallization of an IF Steel.
نویسندگان
چکیده
منابع مشابه
Effect of Composition on the Recrystallization Behavior of if Steels During Simulated Hot Strip Rolling
Flow curves are generated in muti-pass torsion tests for a titanium stabilized and a niobium stabilized IF steel. Two types of test schedule are used, one based on plate rolling and the other approximating strip rolling. The purpose of the former is to define the three critical temperatures of steel rolling. The strip schedules are varied in order to investigate the influence of increasing the ...
متن کاملKinetics of Austenite Recrystallization during the Annealing of Cold-rolled Fe-Mn-Al-C Steel
In the current study, the recrystallization behavior of 75% cold-rolled Fe-22Mn-10Al-1.4C steel during annealing at 750, 770, 790, 810, and 830°C was studied. X-ray diffraction patterns and optical microscopy were used to characterize microstructures. The Vickers Micro-hardness test was used to characterize recrystallization kinetics during annealing. Johnson-Mehl-Avrami-Kolmogorov (JMAK) model...
متن کاملRecrystallization texture during ECAP processing of ultrafine/nano grained magnesium alloy
An ultrafine/nano grained AZ31 magnesium alloy was produced through four-pass ECAP processing. TEM microscopy indicated that recrystallized regions included nano grains of 75 nm. Pole figures showed that a fiber basal texture with two-pole peaks was developed after four passes, where a basal pole peak lies parallel to the extrusion direction (ED) and the other ~20° away from the transverse dire...
متن کاملMonitoring Recovery and Recrystallization in Interstitial Free (IF) Steel by Magnetic Hysteresis Loop Measurements
In this paper, how structure-sensitive parameters derived from the hysteresis loop, like coercive field, remanent induction, and hysteresis losses, can be used to characterise recovery and recrystallization in cold rolled Ti-Nb stabilised interstitial free ultra low carbon steel is shown. The effect on hysteresis measurements of isothermal annealing treatments applied to industrially cold rolle...
متن کاملCorrelation between Recrystallization Texture and Heterogeneities in Deformed Structure of an Electrical Steel by Electron Back-scatter Diffraction
The evolution of the crystallographic texture in lowcarbon steels from a deformed state to a full recrystallization (RX) state upon annealing is an issue with both academic and practical importance.1–4) Normally, the dominant components in the cold-rolled (CR) texture, {hkl}<110> , vanish after RX. Conversely, the RX texture, consisting of varying intensities of {001}, {111} and {011}...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 1994
ISSN: 0915-1559
DOI: 10.2355/isijinternational.34.435