Modeling of Thermophysical and Mechanical Phenomena in Dissimilar Welded Joints
نویسندگان
چکیده
منابع مشابه
Evaluation Of Mechanical Properties Of Dissimilar Metal Tube Welded Joints Using Inert Gas Welding
Evaluation of welding process such as metal inert gas welding and tungsten inert gas arc welding on tensile, bend and hardness properties of austenitic stainless steel SS347H(18Cr 10Ni 1Cb ), T22(21⁄4Cr Mo) and T91(9Cr 1Mo V) grades are studied. Tubes of 54 mm of outer diameter and 4 mm of wall thickness is used as a base material in the following combination SS347H VS T91 and T91 VS T22 is wel...
متن کاملEnhancement in Mechanical Properties of Vibratory Welded Joints: an Overview
This paper consolidated the improvements in mechanical properties from the past literature available using Vibratory welding technique. Vibratory welding is a promising method in eliminating the disadvantages experienced by the traditional welding like residual stress due to the electrical energy input which induces vibrations by varying the input parameters voltage, current, amplitude and freq...
متن کاملEvaluation of microstructure and mechanical properties of friction stir welded copper / 316L stainless steel dissimilar metals
In the present research, friction stir welding (FSW) process was used for butt joining of pure copper plate to 316L stainless steel plate. Mechanical properties and microstructural characteristics of the joint were evaluated by microhardness and tensile tests as well as optical and scanning electron microscope (SEM). It was found that microstructure of the weld nugget (WN) has fine grains where...
متن کاملStudy on Microstructure and Mechanical Properties of Laser Welded Joints of 1.7225 Steel
The aim of the present study is to investigate the mechanical and microstructural properties of 1.7225 steel in laser welding process using Nd:YAG pulsed laser device and then to determine the optimal focal length relative to the part in the welding area. After welding, microstructural characterization, microhardness and tensile tests were performed. Evaluations showed that the optimal focal le...
متن کاملStudy on Microstructure and Mechanical Properties of Laser Welded Joints of 1.7225 Steel
The aim of the present study is to investigate the mechanical and microstructural properties of 1.7225 steel in laser welding process using Nd:YAG pulsed laser device and then to determine the optimal focal length relative to the part in the welding area. After welding, microstructural characterization, microhardness and tensile tests were performed. Evaluations showed that the optimal focal le...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Physica Polonica A
سال: 2020
ISSN: 1898-794X,0587-4246
DOI: 10.12693/aphyspola.138.324