Modeling of soot particle collision and growth paths in gas-solid two-phase flow
نویسندگان
چکیده
Particle collision is an important process in soot particle growth. In this research, based on gas-solid two-phase flow, trajectory was traced by the Lagrange approach with periodic boundaries. Trajectory intersection, probability, and critical velocity were considered, growth path of each traced. The frequency, fc, agglomeration fa, friction ffc, calculated, main influence factors analyzed. results showed that fa/fc increased increase volume fraction gas phase velocity, v, but initial diameter, dpi, had great fa/fc. obviously decreased dpi v. statistical analysis Stokes number number, especially when extremely small, rapidly. Using particle, could be classified three types: firstly, particles did not agglomerate any during entire calculation process, secondly, continually agglomerated small to generate larger ones, finally, at some moment.
منابع مشابه
CFD Simulation of Gas-Solid Two-Phase Flow in Pneumatic Conveying of Wheat
Computational Fluid Dynamics (CFD) simulations of gas-solid flow through a positive low-pressure pneumatic conveyor were performed using Eulerian-Eulerian framework. Pressure drop in pneumatic conveying pipelines, creation and destruction of plugs along the horizontal and vertical pipes, effect of 90° elbows and U-bends on cross-section concentrations, and rope formation and dispersion were...
متن کاملsynthesis of platinum nanostructures in two phase system
چکیده پلاتین، فلزی نجیب، پایدار و گران قیمت با خاصیت کاتالیزوری زیاد است که کاربرد های صنعتی فراوانی دارد. کمپلکس های پلاتین(ii) به عنوان دارو های ضد سرطان شناخته شدند و در شیمی درمانی بیماران سرطانی کاربرد دارند. خاصیت کاتالیزوری و عملکرد گزینشی پلاتین مستقیماً به اندازه و- شکل ماده ی پلاتینی بستگی دارد. بعضی از نانو ذرات فلزی در سطح مشترک مایع- مایع سنتز شده اند، اما نانو ساختار های پلاتین ب...
Modeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell
In this paper, a non-isothermal two-phase flow in the cathode gas diffusion layer (GDL) of PEM fuel cell is modeled. The governing equations including energy, mass and momentum conservation equations are solved by numerical methods. Also, the optimal values of the effective parameters such as the electrodes porosity, gas diffusion layer (GDL) thickness and inlet relative humidity are calculated...
متن کاملSimulation of gas-liquid two phase flow in upriser pipe of gas-lift systems
Gas-lift pumps are devices for lifting liquid phase incorporating the gas phase to be injected in the bottom of liquid column. They are widely used in various industrial applications such as oil extracting in petroleum industries. Gas-liquid flow being the main part of the flow through these systems, flowing in vertical pipes of gas-lift pumps has different regimes namely bubbly, slug, chur...
متن کاملcfd simulation of gas-solid two-phase flow in pneumatic conveying of wheat
computational fluid dynamics (cfd) simulations of gas-solid flow through a positive low-pressure pneumatic conveyor were performed using eulerian-eulerian framework. pressure drop in pneumatic conveying pipelines, creation and destruction of plugs along the horizontal and vertical pipes, effect of 90° elbows and u-bends on cross-section concentrations, and rope formation and dispersion were num...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Thermal Science
سال: 2021
ISSN: ['0354-9836', '2334-7163']
DOI: https://doi.org/10.2298/tsci191110215j