Modeling of Molten Drop Oscillation in Gas shielded Metal Arc Welding

Robotic Shielded Metal Arc Welding

In this work, the development and validation of a methodology for robotic welding with covered electrodes (SMAW) using a variation of the tool center point (TCP) model is shown. The covered electrode becomes part of the kinematic model of the robot as an additional prismatic joint, whose movement is determined by the electrode consumption or melting rate. This allows programming the trajectory ...

Investigations of Drop Detachment Control in Gas Metal Arc Welding

Power input to the arc in gas metal arc welding controls both the metal transfer process and the base-plate heating process. It would be advantageous to decouple these processes. Methods to achieve this decoupling are discussed. Pulsed-power welding is widely used, but only decoupling can be achieved. More complete decoupling may be obtained by using independent power inputs to the system. Seve...

Real Time Trajectory Generation in Robotic Shielded Metal Arc Welding

Abstract. The Shielded Metal Arc Welding (SMAW) is a typical manual process with many dangerous application for the welder (pipe hot tapping, underwater welding, etc.). The process robotization seems to be great for safety associated with the improvement of weld quality and repeatability. This work presents a methodology developed for real time trajectory generation for the robotic SMAW. In thi...

Effective control of gas shielded arc welding fume RR683

Metal Transfer and Arc Plasma in Gas Metal Arc Welding

This article analyzes the transient complex heat transfer and fluid flow in molten metal and arc plasma during the gas metal arc welding process. The model predicts the formation, growth, detachment, and transfer of droplets from the tip of a continuously fed electrode under the influences of several competing forces including gravity, electromagnetic force, arc pressure, plasma shear stress, a...