MODELING OF LAMINAR FLOW TUBULAR REACTOR USING VELOCITY PROFILE
نویسندگان
چکیده
منابع مشابه
Wave Model for Longitudinal Dispersion: Application to the Laminar-Flow Tubular Reactor
The waue model for longitudinal dispersion, published elsewhere as an alternative to the commonly used dispersed plug-flow model, is applied to the classic case of the laminar-flow tubular reactor. The results are compared in a wide range of situations to predictions by the dispersed plugflow model as well as to exact numerical calculations with the 2-0 model of the reactor and to other availab...
متن کاملGrowth Characteristics of Aerosols in a Laminar Flow Tube Reactor
Flow reactors can be used to adjust the composition of aerosol particles if at least one of the components is volatile. Of course, the necessary thermodynamic boundary conditions in particular a defined vapour pressure level over the surface (or a part of the surface) have to be maintained along the reactor. In the case of water as one of the most important aerosol components this condition can...
متن کاملModeling of acetylene pyrolysis under steel vacuum carburizing conditions in a tubular flow reactor.
In the present work, the pyrolysis of acetylene was studied under steel vacuum carburizing conditions in a tubular flow reactor. The pyrolysis temperature ranged from 650 degrees C to 1050 degrees C. The partial pressure of acetylene in the feed mixture was 10 and 20 mbar, respectively, while the rest of the mixture consisted of nitrogen. The total pressure of the mixture was 1.6 bar. A kinetic...
متن کاملModeling of Non-Newtonian Reactive systems in Tubular Reactor
A vast majority of material processing in industry involves homogeneous phase reactions. These reactions are carried out in batch mode as well as continuous mode. The empty tubular reactors are widely used reactor systems for continuous processing in chemical and allied industry. The heat effects due to these reactions necessitate the use of some heat removal/addition system with these reactors...
متن کاملContinuous Polyol Synthesis of Metal and Metal Oxide Nanoparticles Using a Segmented Flow Tubular Reactor (SFTR).
Over the last years a new type of tubular plug flow reactor, the segmented flow tubular reactor (SFTR), has proven its versatility and robustness through the water-based synthesis of precipitates as varied as CaCO3, BaTiO3, Mn(1-x)NixC2O4·2H2O, YBa oxalates, copper oxalate, ZnS, ZnO, iron oxides, and TiO2 produced with a high powder quality (phase composition, particle size, and shape) and high...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Research in Engineering and Technology
سال: 2014
ISSN: 2321-7308,2319-1163
DOI: 10.15623/ijret.2014.0309048